The long-term stability of pharmaceutical formulations of poorly-soluble drugs in polymers determines their bioavailability and therapeutic applicability. However, these formulations do not only often tend to crystallize during storage, but also tend to undergo unwanted amorphous-amorphous phase separations (APS). Whereas the crystallization behavior of APIs in polymers has been measured and mo...

In this research, BaTiO3 thick deposit has been successfully sprayed by air plasma spray. The microstructure and dielectric properties of thick films were investigated by secondary electron microscopy (SEM) and LCR meter respectively. XRD measurement was carried out on plasma sprayed BaTiO3. The results illustrate differences in the crystal structure between plasma sprayed coatings and feed sto...

Recent studies of amorphous solid materials have revealed the possibility that more than one distinct amorphous phase may be formed from the same substance. In analogy with the phenomenon of crystalline polymorphism, this behavior has been termed “amorphous polymorphism”. We review the experimental manifestation of amorphous polymorphism, especially in tetrahedrally coordinated materials such a...

Relaxation processes associated with the glass transition in nonferroelectric and ferroelectric polyamide (PA) 11 are investigated by means of differential scanning calorimetry, dynamic mechanical analysis, and dielectric relaxation spectroscopy (DRS) in order to obtain information about the molecular mobility within the amorphous phase. In particular, the effects of melt quenching, cold drawin...

EXAFS can be used to characterise the phase of an amorphous calcified deposit mixed with a crystalline phase which does not contain calcium. In such a mixture, the amorphous phase may not be detectable by X-ray diffraction. This application of EXAFS is illustrated by the characterisation of the calcium phosphate deposited in association with struvite in encrusted urinary catheters.

The tubulization process of amorphous carbon nanopillars was observed in situ by transmis-sion electron microscopy. Amorphous carbon nanopillars were transformed into graphitic tubules by annealing at 650-900 degrees C in the presence of iron nanoparticles. A molten catalyst nanoparticle penetrated an amorphous carbon nanopillar, dissolving it, and leaving a graphite track behind. An iron nanop...

in this study, nickel-phosphorus coating was prepared by electrodeposition technique on the 304 stainless steel substrate. the effects of current density, phosphorous acid concentration, time and ph on the phosphorous content was investigated using taguchi method. a uniform amorphous-nanocrystalline structure (ni-12%p) was obtained. sem, eds, tem and xrd were used in order to study the surface ...

We fabricated C-doped (1.5 wt.%) In3Sb1Te2 (CIST) thin films with amorphous phase (a-CIST) using a sputter method. Two electrical-phase-changes at 250 and 275 °C were observed in the sheet resistance measurement. In order to understand the origin of these electrical-phase-changes, all samples were characterized by XRD, TEM, and HRXPS with synchrotron radiation. In a-CIST, only weak Sb-C bonding...