Computer simulations are used to simulate the adsorption isotherms of methane, ethane, and propane in the zeolite silicalite. Various zeolite-alkane models have been tested via a comparison with experimental heats of adsorption and Henry coefficients. These tests are used to improve the existing models. It is shown that the calculated adsorption isotherms agree well with the available experimen...

In this work, the effects of As-doped on the adsorption of oxygen gas on the outer and inner surface ofboron nitride nanotube (BNNTs) is investigated. The structural parameters, quantum properties involving:bond length, bond angle, HOMO-LUMO orbital, gapenergy, electron affinity, electronegativity, chemicalpotential, global hardness, global softness and NMR parameters of BNNTs are calculated at...

In this research paper, chemically activated Thuja Occidentalis leaves carbon (CATLC) is used as an adsorbent for the expulsion of Mn(II) from aqueous solution. CATLC is characterized by FTIR, SEM and EDX. The effect of pH, initial Mn(II) concentration, CATLC dosage and contact time on the adsorption performance of CATLC for Mn(II) ions are examined by batch studies. The results reveal that CAT...

In this study, tea waste (TW) is employed for the removal of Congo red (CR) from aqueous solutions in a fixed-bed column at 30 °C. The breakthrough curves of the adsorption process of CR on TW at three different flow rates are determined. The results revealed that the breakthrough curves were dependent on flow rates in a manner in which a lower flow rate was in favor of the CR adsorption in the...

Activated carbon honeycomb-monoliths with different textural properties were prepared by chemical activation of African palm shells with H(3)PO(4), ZnCl(2) and CaCl(2) aqueous solutions of various concentrations. The adsorbents obtained were characterized by N(2) adsorption at 77 K, and their carbon dioxide adsorption capacities were measured at 273 K and 1 Bar in volumetric adsorption equipmen...

The process of pollutant adsorption from industrial wastewaters is a multivariate problem. This process is affected by many factors including the contact time (T), pH, adsorbent weight (m), and solution concentration (ppm). The main target of this work is to model and evaluate the process of pollutant adsorption from industrial wastewaters using the non-linear multivariate regression and intell...

An agricultural waste i.e. rice husk has been used as a cheap adsorbent for the removal ofleadas a harmful heavy metal from contaminated water via adsorption. The adsorption capacity of rice husk was calculated by equilibrium models. The results showed that the adsorption process has the best accordance with Langmuir model. The kinetics of the adsorption was also investigated and obtained that ...

Cadmium (Cd) concentration in soil solution and its bioavailability is controlled by sorption-desorption reactions. The objective of this research was to compare Cd adsorption behavior in six calcareous and four acid soils. Soil samples were equilibrated with 0.01 M Ca(NO3)2 containing 25 to 3200 mg Cd L−1. Results showed that the tendency for adsorption was high at low Cd concentrations (0-400...

The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...

Adsorption of p-Nitrophenol by three different activated carbons (F100, S.E.I. and B.D.H.) was carried out at 301 K and at controlled pH conditions. Two different adsorption models (Langmuir model and Freundlich model) were studied and compared. The adsorption capacity of the carbons depends on the Point of Zero Charge (PZC) and surface area of the carbons. Adsorption of the solute at higher pH...