The localized corrosion behavior of laser surface melted 304L austenitic stainless steel was studied by potentiodynamic polarization test. The extent of improvement in corrosion resistance was governed by the preferred orientation and the percentage of delta ferrite present on the surface of the laser melted sample. It was established by orientation imaging microscopy that the highest pitting p...

Nanocrystalline magnesium ferrite is synthesized by high-energy ball milling. The formation of nanocrystalline ferrite phase is observed after 3 h of milling and its content increases with milling time. The structural and microstructural evolution of the nanophase have been studied by X-ray powder diffraction and the Rietveld method. After 3 h of milling, ferrite phase (mixed spinel) nucleates ...

Article history: Received 29.05.2012. Received in revised form 27.07.2012 Accepted 03.09.2012. The influence of sub-temperature quenching temperature on the tensile strength, hardness and toughness of 60Si2Mn steel has been studied, and the ferrite content, austenite grain size and martensite morphology of the microstructure of this steel after sub-temperature quenching analyzed. The results sh...

Many aspects of the crystallographic texture which develops when austenite transforms into martensite or bainite are well established because the process by which the parent lattice is transformed into that of the product is mathematically defined. This is not the case when the ferrite forms by a reconstructive mechanism. The allotriomorphic ferrite nucleates heterogeneously at austenite grain ...

We perform extensive finite difference time domain simulations of ferrite based negative index of refraction composites. A wire grid is employed to provide negative permittivity. The ferrite and wire grid interact to provide both negative and positive index of refraction transmission peaks in the vicinity of the ferrite resonance. Notwithstanding the extreme anisotropy in the index of refractio...

We consider an implementation of quantum gates for quantum computation using magnetostatic/magnetoelectric (MS/ME) macroscopically quantized states in small ferrite disks. Confinement phenomena for MS oscillations in a normally magnetized ferrite disk show typical atomic properties like discrete energy levels. Because of discrete energy eigenstates of MS oscillations, the oscillating system is ...

NiFe₂O₄ and ZnFe₂O₄ nanoparticles have been prepared encased in the MCM (Mobile Composition of Matter) type matrix. Their magnetic behavior has been studied and compared with that corresponding to particles of the same composition and of a similar size (prepared and embedded in amorphous silica or as bare particles). This study has allowed elucidation of the role exerted by the matrix and inter...

We report investigation on properties of multiwall carbon nanotubes (mCNTs) containing Ni residuals before and after encapsulation of zinc ferrite nanoparticles. The pristine tubes exhibit metallic character with a 0.3 eV reduction in the work function along with ferromagnetic behavior which is attributed to the Ni residuals incorporated during the preparation of tubes. Upon encapsulation of zi...

The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...

To clarify the mechanism of acicular ferrite formation in low carbon submerged arc weld metals of a Ti-B system with different aluminum contents, the lattice misfit between inclusion and acicular ferrite was investigated. The inclusions were directly sliced into thin foils by a focused ion beam device and crystallographic analyses were performed using a transmission electron microscope. These i...