Two codes have been developed: one allows columnar polycrystal geometries generated by software such as Neper or DREAM3D to be imported into the Complete Abaqus Environment for further geometric manipulation and meshing with arbitrary element types; other code generates zero thickness, four noded interface elements at boundaries between crystals. Together these allow intergranular fracture simu...

Assumption of a linear elastic system under static loading is questionable for structural response analysis of pavement-subgrade systems under dynamic nondestructive testing and moving wheel loads, especially if a deteriorated pavement is under study. Presented are the results of a parametric study using the three-dimensional finite element ABAQUS code; it investigates the effects of pavement d...

ABAQUS provides the-state-of-the-art capabilities in hyperelastic modeling of rubber and other isotropic elastomers. Practical interest, however, is often focused on anisotropic elastomer-like materials (e.g., bio-tissues, cord-rubber composites, reinforced polymers, etc.) where properties in various directions are significantly different. The present paper considers a general constitutive mode...

Several approaches for simulating ultrasound are available. The main tools are Finite or Boundary element methods and the spatial impulse response methods. Finite and Boundary Element methods are the most flexible but also the most computationally expensive tools available. On the other hand the spatial impulse response is restricted only to linear acoustic problem, but with low computational d...

Analyses of dynamic responses are significantly important for the design, maintenance and rehabilitation of asphalt pavement. In order to evaluate the dynamic responses of asphalt pavement under moving loads, a specific computational program, SAFEM, was developed based on a semi-analytical finite element method. This method is three-dimensional and only requires a two-dimensional FE discretizat...

In the selective laser sintering (SLS) manufacturing technique a pre-heated layer of material powder undergoes a laser radiation in a selective way to produce three dimensional metallic or polymeric solid parts. Here, we consider sintering of polymer powder. The phase transformation in this process involves the material heat transfer which is strongly affected by the material sintering phenomen...

In order to ascertain the fire resistance performance of recycled aggregate concrete (RAC) components with different concrete compressive strengths, four full-scaled concrete columns were designed and tested under high temperature. Two of the four specimens were constructed by normal concrete with compressive strength ratings of C20 and C30, respectively, while the others were made from recycle...

In this study, the hydrogen transport phenomenon was numerically evaluated by using hydrogen-enhanced localized plasticity (HELP) mechanisms. Two dominant governing equations, namely, the hydrogen transport model and the elasto-plastic model, were introduced. In addition, the implicitly formulated equations of the governing equations were implemented into ABAQUS UMAT user-defined subroutines. T...

This study evaluates the back calculation of stiffness of a pavement section on Interstate 40 (I-40)in New Mexico through numerical analysis. Falling Weight Deflectometer (FWD) test has been conducted on a section on I-40. Layer stiffness of the pavement has been backcalculated by a backcalculation software, ELMOD, using the FWD test data. Commercial finite element software, ABAQUS, has been us...