The variations of the electrical conductivity with temperature and electric field of the ternary alloy of gallium, aluminium and arsenic (Al0.75Ga0.25As) with atomic compositions of 99/1 and 98/2 have been investigated. The electrical conductivity of the alloy increases with temperature according to the relation, ? = ?0 exp (??/kT). The activation energy calculated from this empirical relation ...

the aim of this article is study of tool plunge depth (tpd) effects on mechanical properties of friction stir welding of aa1100 aluminium alloy to a441 aisi steel. for this purpose the 0.1, 0.2, 0.4, and 0.6 mm tpd selected and other welding parameters kept constant. the results shows that the frictional heat increases and stir zone grain size decreases with increasing tpd at both base metals. ...

In a randomised study, 28 patients with a mean age of 62.2 years (32 to 81) with osteoarthritis or avascular necrosis of the hip received either a ceramic-on-ceramic or a metal-on-metal total hip replacement. Apart from the liners the acetabular and femoral components were made of Ti-Al-Nb alloy. The serum aluminium and cobalt levels were measured before, and at one year after surgery. The 15 p...

Previous studies have yet to show a consistent effect of severe plastic deformation (SPD) processing on the wear behavior different metals and alloys. To fill this scientific gap, study investigated cyclic extrusion compression (CEC) process, as one prominent SPD techniques, AA5052. In addition, microstructure evolution mechanical properties sample before after process were experimentally exami...

Abstract The aluminium alloys 5052 and 6082 are extensively used in manufacturing lighter structural members, having improved strength resistance to corrosion. Magnesium (Mg) Chromium (Cr) powder were the filler materials selected for enhanced corrosion protection properties this investigation. Friction stir welding (FSW) process parameters viz., spindle speed, shoulder penetration, centre dist...

Abstract: In this research plasma nitriding of pure aluminium and effect of iron elemental alloy on the formation and growth of aluminium nitride was investigated. Also corrosion properties of formed AlN were investigated. After preparation, the samples were plasma nitrided at 550oC, for 6, 9 and 12 h and a gas mixture of 25%H2-75%N2. The microstructure and phases analysis were investigated usi...

Wetting of real engineering surfaces occurs in many industrial applications (liquid coating, lubrication, printing, painting...). Forced and natural wetting can be beneficial in many cases, providing lubrication and therefore reducing friction and wear. However the wettability of surfaces can be strongly affected by surface roughness. This influence can be very significant for static and dynami...