ZnO/CdS heterostructured nanocomposites were fabricated with enhanced light harvesting capability and photostability using sequential sonochemical and hydrothermal methods from ZnO rods and particles. Interestingly, in the composite made up of CdS sensitized ZnO rods, both ZnO and CdS exist in the hexagonal wurtzite form with different morphologies. On the other hand, in the composite made up o...

A combination of 3-dimensional (3D) hollow mesoporous ZnO microspheres (ZnO HMSP) and vertically grown one-dimensional ZnO nanowires (1D ZnO NWs) on a fluorine doped tin oxide (FTO) coated glass substrate has been investigated as a photoanode for a CdS quantum dot-sensitized solar cell (QSSC). A comparative study of the photovoltaic performance of the solar cell with devices fabricated with pri...

In this research, nanoimprint lithography (NIL) was used for patterning crystalline zinc oxide (ZnO) nanorods on the silicon substrate. To fabricate nano-patterned ZnO nanorods, patterning of an n-octadecyltrichlorosilane (OTS) self-assembled monolayers (SAMs) on SiO2 substrate was prepared by the polymer mask using NI. The ZnO seed layer was selectively coated only on the hydrophilic SiO2 surf...

ZnO/nitrogen-doped carbon nanotube (ZnO/NCNT) composite, prepared though a simple one-step sol-gel synthetic technique, has been explored for the first time as an anode material. The as-prepared ZnO/NCNT nanocomposite preserves a good dispersity and homogeneity of the ZnO nanoparticles (~6 nm) which deposited on the surface of NCNT. Transmission electron microscopy (TEM) reveals the formation o...

ZnO microspheres, ZnO microflowers and ZnO nanorods are successfully synthesized via a convenient solvothermal method in distilled water-ethanol mixed medium. The as-prepared ZnO micro/nanomaterials are characterized by XRD, SEM, TEM, HRTEM, XPS, BET, and UV-Vis. The morphologies and exposed facets of the ZnO micro/nanomaterials can be controlled by simply changing the volume ratio of distilled...

In this study, pure ZnO, CeO2 and ZnO/CeO2 nanocomposites were synthesized using a thermal decomposition method and subsequently characterized using different standard techniques. High-resolution X-ray photoelectron spectroscopy measurements confirmed the oxidation states and presence of Zn(2+), Ce(4+), Ce(3+) and different bonded oxygen species in the nanocomposites. The prepared pure ZnO and ...

ZnO was successfully synthesized by a conventional synthetic route using zinc nitrate as a source for ZnO formation. X-ray diffraction and thermogravimetric analysis revealed a crystal size of 66 nm of ZnO and a thermal stability of 500 °C. A small amount of ZnO particles was employed as the source for ZnO-rod growth on nylon 6 surfaces. Scanning electron microscope images were taken to evaluat...

ZnO columnar single crystals were formed by pulsed laser ablation in deionized water and surfactant aqueous solutions of lauryl dimethylaminoacetic acid (LDA) and cetyltrimethylammonium bromide (CTAB) at 80 degrees C. ZnO particles produced by laser ablation were dissolved at a higher temperature than 60 degrees C, and then crystalline growth to columnar structure proceeded. While large ZnO col...

Tubular ZnO microstructural arrays were fabricated by a hydrothermal decomposition method. The dependence of the morphologies on the growth time and temperature was investigated in detail. An experiment was carried out to determine the mechanism of tubular ZnO formation. Our results showed that ZnO microtubes originated from an ageing process from ZnO microrods at a lower temperature (compared ...

ZnO nanoparticle array has been fabricated on the Si substrate by a simple thermal chemical vapor transport and condensation without any metal catalysts. This ZnO nanoparticles array is constructed from ZnO quantum dots (QDs), and half-embedded in the amorphous silicon oxide layer on the surface of the Si substrate. The cathodoluminescence measurements showed that there is a pronounced blue-shi...