in this research, high oxygen-barrier films were organized based on low-density polyethylene (ldpe)/ ethylene vinyl alcohol (evoh)/ polyethylene-grafted maleic anhydride (ldpe-g-ma) compatibilizer. the effects of 10–30 wt. % evoh and 0–10 wt. % ldpe-g-ma loadings on the properties of final films were evaluated. the morphology of specimens was observed by using scanning electron microscopy (sem)...

Wearable flexible sensors have developed rapidly in recent years because of their improved capacity to detect human motion wide-ranging situations. In order meet the requirements flexibility and low detection limits, a new pressure sensor was fabricated based on electrospun barium titanate/multi-wall carbon nanotubes (BTO@MWCNTs) core-shell nanofibers coated with styrene-ethylene-butene-styrene...

در این تحقیق، خواص مکانیکی، شامل استحکام کششی، مدول الاستیک، ازدیاد طول و استحکام ضربه ای نانوکامپوزیت های بر پایه آلیاژ پلی پروپیلن و پلی اتیلن خطی چگالی پایین، تقویت شده با نانوذرات اکسید تیتانیوم بررسی شده است. برای طراحی آزمایش جهت تهیه ترکیبات از طرح box-behnken روش رویه پاسخ (rsm) استفاده شده است. بر اساس این طرح ازمایش 15 نمونه شامل 0، 2 و 4 درصد وزنی نانو ذرات اکسید تیتانیوم 0، 3 و 6 در...

Polymer nanocomposites have attracted increased attention for use in the field of high-voltage direct current (HVDC) cable insulation. To study polymer this purpose, 3D flower-like MgO (flower-MgO) particles with hierarchical surface morphology are first synthesised. Polypropylene (PP) was simultaneously mixed styrene-(ethylene-co-butylene)-styrene triblock copolymer (SEBS) and flower-MgO to ob...

• Soft-elastic baffles (SEBs) intensified mixing in a soft-elastic reactor (SER). A best design of SER with SEBs was identified. Mixing SERs large length to diameter ratios by SEBs. (SER) has been demonstrated as an alternative approach effective viscous liquid. Here, the performance Newtonian fluid—glycerin water solutions (1200±50 mPa⋅s) experimentally investigated for first time inside simpl...

Complicated nano-patterns with linewidth less than 18 nm can be automatically hammered by using atomic force microscopy (AFM) tip in tapping mode with high speed. In this study, the special sample was thin poly(styrene-ethylene/butylenes-styrene) (SEBS) block copolymer film with hexagonal spherical microstructures. An ordinary silicon tip was used as a nano-hammer, and the entire hammering proc...

Polypropylene (PP) compounds with styrene–butadiene rubber residue (SBRr) from the footwear industry were produced, adding styrene-(ethylene–butylene)-styrene (SEBS) as a compatibilizer, 20% and 30% of styrene (St.). The PP/SBRr PP/SBRr/SEBS processed in co-rotating twin-screw extruder injection molded. addition SBRr did not compromise processability, torque melt flow index increased slightly c...