The fatigue crack growth behavior of a cracked and patch-repaired AA2024-T3 panel has been monitored by acoustic emission (AE). It was found that the overall crack growth rate was reduced and the crack propagation into the adjacent rivet hole was also retarded by introducing the patch repair. AE signals due to crack growth after the patch repair and those due to disbonding of the aluminum-patch...

Laser beam welding produces good quality welds with minimum shrinkage for sheet metal joints. The quality of welded joint depends upon surface morphology, hardness, mixing of liquid phases and metallurgical non-homogeneity induced by gradients of temperatures and cooling rate at the weld interface. In the present investigation, Titanium Grade5 (Ti) and AA2024 (Al) alloy dissimilar sheet metals ...

To achieve reliable welds with minimum distortion for the fabrication of components in aerospace industry laser beam welding is attempted. Laser welding can provide a significant benefit for the welding of Titanium and Aluminium thin sheet alloys of its precision and rapid processing capability. For laser welding, pulse shape, energy, duration, repetition rate and peak power are the most import...

هیدروفرمینگ لوله به‌طور گسترده، در تولید قطعات ساختاری اتومبیل استفاده می‌شود. یکی از خصوصیات تولید‌شده با این فرایند، نسبت استحکام به وزن بالا می‌باشد. لولۀ فشار پایین، روش‌های پیشنهاد‌شده برای حل مشکلات قبیل نیاز بالای سیال و آب‌بندی روش انجام پایین لوله، شبیه فشردن جسم جامد است آن برخلاف بالا، قالب بالایی طول فرایند ثابت نبوده هم‌زمان اعمال داخلی حرکت کرده را تحت قرار می‌دهد. مقاله، لوله‌های...

Abstract—The machinability of workpieces (AISI 1045 Steel, AA2024 aluminum alloy, A48-class30 gray cast iron) in turning operation has been carried out using different types of cutting tool (conventional, cutting tool with holes in toolholder and cutting tool filled up with composite material) under dry conditions on a turning machine at different stages of spindle speed (630-1000 rpm), feed ra...

Nanoindentation has been used to study the hardness changes produced by scratching of aluminium alloy AA2024, with and without a clad layer of pure aluminium. The hardness was mapped around scratches made with diamond tools of different profiles. One tool produced significant plastic damage with associated hardening at the scratch root, whilst the other produced a ‘cleaner’ cut with no hardenin...

To gain insight into the origin of the ultra-high strength of ultrafine-grained (UFG) alloys, the solute clustering, precipitation phenomena, and microstructural evolutions were studied in an UFG Al-4.63Cu-1.51Mg (wt.%) alloy (AA2024) processed by high-pressure torsion (HPT). The thermal analysis was performed using differential scanning calorimetry. The microstructures, internal microstrains a...