Electrical discharge machining (EDM) is a non conventional manufacturing process which is used for shaping hard metals and forming deep complex shaped profiles by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to study the influence of process parameters and electrode shape configuration on the machining characteristics such as surface quality, material...

the aim of this research was to study the wear behavior of 42crmo4 steel/zro2 composite with 10 and 30 ppi performed ceramic and compare it with the un-reinforced steel under different applied loads. the composite specimens were obtained by pressureless infiltration of the melt into a preformed ceramic of zirconium oxide. the effect of applied load on the specimens wear behavior was studied by ...

Steel composites reinforced with alumina nanoparticles were prepared by powder metallurgy process. Samples containing two different amounts of carbon (0.35 and 0.55 wt.%) and 0-5 wt.% Al2O3 nanoparticles were fabricated by mixing, compacting and sintering of diffusion bonded Distaloy AE powder. The density, hardness and wear tests were performed on the prepared samples. Fu...

Bimetallic parts are used in many industries for weight and cost reduction of workpieces working under high loads and wear. One application for this type of composite material is in automotive industry. In this work the tool wear and cutting forces in the face milling of bimetallic parts made of aluminum and cast iron were investigated. A356 and GG25 alloys that are common materials for bimetal...

Single screw compressors (SSCs) have been used in many fields. Compared with other kinds of compressors, the SSC should have many advantages due to its symmetrical structure and well balanced radial gas pressure on the screw rotor. However, its durability is not as good as expected. After operating for several thousand hours, its flow rate often decreases sharply. The essential reason is that t...

Ž . In the aerospace industry, 9Cr18 martensitic stainless steel AISI 440 is commonly used as a bearing material. Because of its Ž . ability to rapidly treat irregular industrial components, plasma immersion ion implantation PIII is an effective method to improve the wear resistance of 9Cr18 precision bearings and prolong their working lifetime. Vacuum arc plasma sources provide a good means of...

In this paper, the wear resistance and antifriction of epsilon phase layer and diffusion layer of gas nitrided D2 steel and M2 steel have been studied. The changes m wear mechanism of epsilon phase under the load from 20N to 200N are analysed. When the load is lighter than 100N, it is mainly oxidizing wear on friction surface. The adhesion, peeling off and abrasive wear appear on friction surfa...

conclusions estelite sigma quick composite had wear resistance similar to that of nano- and microfilled composites. estelite flowable composites demonstrated similar wear resistance to that of a posterior composite. results the wear amounts of the composites are as follows in order: estelite sigma quick (1886.9 ± 518.5 μm2), estelite flow quick (2708.9 ± 578.1 μm2), estelite high flow (3206 ± 2...