In this study, the effect off adding SiO2 nanoparticles on the viscosity of base fluid is investigated experimentally. Base fluids are chosen among common heat transfer fluids such as ethylene glycol, transformer oil and water. In addition different volume percentages of ethylene glycol in water are used as ethylene glycol-water solution. In every base fluid different volume fractions of SiO2 n...

Nanofluids are engineered fluids that contain a suspension of nanoparticles in a pure substance. Nanoparticles can be any variety of metals, metal oxides, or ceramics. They have been shown to increase heat transfer properties such as thermal conductivity, convective heat transfer, and critical heat flux(CHF). An optical probe used to detect phase was used to measure the void fraction during boi...

in the present study the effect of curvature ratio and coil pitch for tio2/water nanofluid laminar flow on heat transfer behavior and pressure drop through helical coils with different geometries was investigated experimentally. the tio2/water nanofluids at 0.25% to 2% particle volume concentrations have been prepared by using a two-step method. the experiments were performed for coils with cur...

double-diffusive mixed convection in a lid-driven square enclosure filled with al2o3-water is numerically investigated. two-dimensional nonlinear governing equations are discretized using the control volume method and hybrid scheme. the equations are solved using simpler algorithm. the results are displayed in the form of streamlines, isotherms, and iso-concentrations when the richardson number...

in the present paper, the flow and heat transfer of two types of nanofluids, namely, silver-water and silicon dioxide-water, were theoretically analyzed over an isothermal continues stretching sheet. to this purpose, the governing partial differential equations were converted to a set of nonlinear differential equations using similarity transforms and were then analytically solved. it was found...

in this paper, the effect of the brownian term in natural convection of cuo-water nanofluid inside a partially filled porous cavity, with internal heat generation has been studied. it is assumed that the viscosity and thermal conductivity of nanofluid consists of a static part and a brownian part of which is a function of temperature and the volume fraction of nanofluid. because of internal hea...

In this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. In numerical study, single and two-phase models have been used. In single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. Effects of volume fraction a...

In this article, developing turbulent forced convection flow of a water-Al2O3 nanofluid in a square tube, subjected to constant and uniform wall heat flux, is numerically investigated. The mixture model is employed to simulate the nanofluid flow and the investigation is accomplished for particles size equal to 38 nm.An entropy generation analysis is also proposed in order to find the optimal wo...

The efficiency of two-phase closed thermosyphon (TPCT) with nanofluid as working fluid under magnetic field effect was investigated experimentally. In this study, silver/water nanofluid with different concentration (20 to 80ppm) is tested. Also, magnetic field with various strength (0.12, 0.35 and 1.2 T) exerted to TPCT by permanent magnet. It was seen that the TPCT heat transfer performance an...