-The distribution of toxic heavy metals was studied throughout the process of treatment of domestic wastewater by stabilization ponds. The concentrations and distribution of free and bound zinc, cadmium, lead and copper through the various stages of a treatment plant were analyzed by Anodic Stripping Voltammetry (ASV). Only a slight decrease in the total metals concentration was observed during...

An intermittent discharge waste stabilisation pond system was trialled for treatment of a seasonal wastewater load from a campsite. The system showed rapid acclimatisation to incoming load, with chlorophyll-a exceeding 700 mg l(-1) within 2 weeks and filtered and unfiltered effluent biochemical oxygen demand below 20 and 30 mg l(-1) respectively. Good performance continued for some weeks, after...

Increased swine production in North Carolina has resulted in greater waste generation and is demanding some emerging new innovative technologies to effectively treat swine wastewater. One of the cost-effective and passive methods to treat swine wastewater is using constructed wetlands. The objective of this study was to evaluate the N removal under two N loads in 3 different wetland systems: ae...

This paper presents the stabilization potential of Class F pond ash (PA) from a coal fired thermal power station on tropical peat soil. Peat or highly organic soils are well known for their high compressibility, natural moisture content, low shear strength and long-term settlement. This study investigates the effect of different amount (i.e., 5, 10, 15 and 20%) of PA on peat soil, collected fro...

evaluation and modeling of the wastewater treatment plants (wwtp) have to be based on thefact that the pollutant concentrations and flow rates change constantly. in addition, different approaches mustused due to there are different processes in a wwtp. a mexican petrochemical complex has a wwtp thatprocesses wastewaters from several petrochemical plants, where the flow rates and pollutant conce...

A bioflocculant-producing bacterium, Bacillus megaterium SP1, was isolated from biofloc in pond water and identified by using both 16S rDNA sequencing analysis and a Biolog GEN III MicroStation System. The optimal carbon and nitrogen sources for Bacillus megaterium SP1 were 20 g L-1 of glucose and 0.5 g L-1 of beef extract at 30°C and pH 7. The bioflocculant produced by strain SP1 under optimal...

Brewing is the process is for production of beer [1,2]. It is said that for every 1 liter of beer production approximate 10 liters of water is used [3]. The water in any brewery is typically used for brewing, rising and cooling process [3]. The various steps that are involved in brewing process are malt production and handling, worth preparation, fermentation, filtration, CIP and finally packag...