نتایج جستجو برای: vickers hardness
تعداد نتایج: 26736 فیلتر نتایج به سال:
SnSe and SnS have been grown by BridgmanStockbarger method. Loading time as a function of vickers microhardness has been measured at different temperatures in the range 303 K to 388K. Al measurement of hardness have been carried out on the cleavage planes. The activation energy for creep has been evaluated to be 2.92 and 1.75 K Cal/mole, respectively, for SnSe and SnS crystals.
Although titanium is considered to be a ubiquitous element as it has the 10th-highest Clarke number of all the elements, it is actually classified as a rare metal because the current refinement process for the metal is more environmentally damaging than the processes used to refine iron and aluminum. Furthermore, the principal alloying elements of titanium alloys are very expensive, owing to th...
In the present article, RRA, T73 and T6 heat treatments were carried out to improve mechanical properties of 7075 aluminum alloy and its hardness, tensile and bending strengths were evaluated. For this purpose, solution annealing was performed at 530 ºC for 16 h. For T6 treatment, aging was executed at 150 ºC for 24 h after solution annealing. In T73, aging treatment was done in two s...
Microstructure and properties of the Al-6Si-0.3Mg alloys containing scandium (0.2 to 0.6wt %) were investigated. The microstructure was observed by optical microscopy, the hardness was determined by Vickers tester and phase transformation was investigated by differential scanning calorimetry (DSC) technique. The results showed that scandium can refine dendrites, enhance hardness in the aged all...
This study evaluated the effect of water-bath and microwave post-polymerization treatments on the flexural strength and Vickers hardness of four autopolymerizing reline resins (Duraliner II-D, Kooliner-K, Tokuso Rebase Fast-TR and Ufi Gel Hard C-UGH) and one heat-polymerized acrylic resin (Lucitone 550-L), processed using two polymerization cycles (short cycle - 90 minutes at 73 degrees C and 1...
This investigation aims at determining the microhardness value of the hybrid direct/indirect composite resins submitted to conventional light curing and post-cured using two different methods, a light source from a laboratory light curing unit and a conventional oven heating, and the obtained results were compare to an indirect composite resin. A hybrid direct/indirect composite resin (Filtek P...
Bronization and carburization of fine-grain superplastic stainless steel is reviewed, and new experimental results for fine grain Ti88.5Al4.5V₃Fe₂Mo₂ are reported. In superplastic duplex stainless steel, the diffusion of carbon and boron is faster than in non-superplastic duplex stainless steel. Further, diffusion is activated by uniaxial compressive stress. Moreover, non-superplastic duplex st...
An orthorhombic (space group Pnnm) boron phase was synthesized at pressures above 9 GPa and high temperature, and it was demonstrated to be stable at least up to 30 GPa. The structure, determined by single-crystal x-ray diffraction, consists of B12 icosahedra and B2 dumbbells. The charge density distribution obtained from experimental data and ab initio calculations suggests covalent chemical b...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید