The objective of this study was to establish the mechanism(s) controlling degradation of yttria-tetragonally-stabilized zirconia (Y-TZP) powder in aqueous suspensions and determine the significance of this degradation to the aqueous physical chemistry of Y-TZP. Experiments were performed on commercially available Y-TZP powder placed in aqueous suspensions at 25°C. Experimental investigations in...

This study investigated the influence of surface roughness and cyclic loading on fatigue resistance in Y-TZP subjected to hot isostatic pressing (HIP). Fifty Y-TZP cylinders 3.0 mm in diameter were divided into Group A (polished by centerless method; TZP-CP) or Group B (blasted and acid-etched: TZP-SB150E). Twenty five cp-titanium cylinders (Ti-SB150E) were used as a control. Static and cyclic ...

The aim of this study was to assess whether surface treatment improves zirconia-porcelain adhesion. The 3Y-TZP blocks were cut into squares, then polished and sintered. The zirconia surface treatments were performed as follows: no treatment (C); tribochemical silica coating (TBS); glaze application + hydrofluoric acid etching (GA); glaze application + hydrofluoric acid etching + silanization (G...

Nowadays it is possible to produce ceramic parts with solid and complex shapes rapid efficient shaping sintering techniques. In this paper, 3mol% yttria stabilized zirconia (3Y-TZP) dense lattice were shaped by Digital light processing method (DLP) densified conventional (CV) microwave (MW) sintering. 3Y-TZP samples MW sintered up 1550 °C different heating rates (10, 30, 50 °C/min) for the 30 °...

It was indicated that tetragonal zirconia polycrystal (TZP) containing yttria (Y₂O₃) and niobium oxide (Nb₂O₅) ((Y,Nb)-TZP) could be an adequate dental material to be used at esthetically important sites. The (Y,Nb)-TZP was also proved to possess its osteogenic potential comparable with those conventional dental implant material, titanium (Ti). The objective of the current study was to characte...

The aim of this in vitro study was to investigate the wear behavior of the abrader when tetragonal zirconia polycrystal (TZP), cp-titanium (CpTi) and Ti-6Al-4V alloy (TiAlV) were used as the antagonist on fixed dental prostheses (FDPs). Both hemisphere abrader and flat substrate specimens were prepared using TZP, CpTi and TiAlV. Two-body wear tests were performed in distilled water, and the wea...

Objectives Many advantages have been attributed to dental zirconia ceramics in terms of mechanical and physical properties; however, the bonding ability of this material to dental structure and/or veneering ceramics has always been a matter of concern. On the other hand, hydroxyapatite (HA) shows excellent biocompatibility and good bonding ability to tooth structure, with mechanically unstable ...

Y2O3-stabilized tetragonal ZrO2 polycrystal (Y-TZP) has been known to be an excellent structural material with high strength and toughness since the pioneering study by Garvie et al. in 1975. However, Y-TZP is not considered an environmental or biomedical material because it undergoes an inherent tetragonal-to-monoclinic (T → M) phase transformation in humid or aqueous environment, which leads ...