Introduction An understanding of the crystallization kinetics of magnetic amorphous alloys is of scientific interest for two important reasons. First, for an alloy that exhibits excellent magnetic properties in its amorphous phase, the crystallization kinetics represent the limit at which these properties begin to deteriorate. Therefore, thermal stability determines the magnetic stability of th...

The effect of oxygen content on the microstructure and mechanical properties of the Ti-29mass%Nb-13mass%Ta-4.6mass%Zr (TNTZ) alloy was investigated in this study. The microstructural observation of TNTZ alloys, containing 0.1–0.4mass% oxygen, subjected to solution treatment shows the presence of a single phase. With an increase in oxygen content, the hardness, tensile strength, and Young’s modu...

0

The effect of Yttrium addition on the microstructure and mechanical properties of Sn-Zn eutectic alloy, which has been attracting intensive focus as a Pb-free solder material, was investigated in this study. Phase equilibrium has been calculated by using FactSage® to evaluate the composition and fraction of equilibrium intermetallic compounds and construct a phase diagram. In the case of Sn-8.8...

Based on the experimental results and the finite element analysis, a constitutive model is proposed for two phase shape memory alloys by introducing a compensative volumetric strain into a constrained relationship between the two phases, accounting for the reduced constraint due to the growth of martensite band. The pseudoelasticity of NiTi shape memory alloy micro-tube, subjected to pure tensi...

The microstructures of two metal hydride (MH) alloys, a Zr7Ni10 based Ti15Zr26Ni59 and a C14 Laves phase based Ti12Zr21.5V10Ni36.2Cr4.5Mn13.6Sn0.3Co2.0Al0.4, were studied using the electron backscatter diffraction (EBSD) technique. The first alloy was found to be composed of completely aligned Zr7Ni10 grains with a ZrO2 secondary phase randomly scattered throughout and a C15 secondary phase pre...

Abstract: Guinier-Preston (GP) zone formation and precipitation behavior of T1 (Al2CuLi) phase during the ageingof an Al-Cu-Li-Zr alloy was studied by differential scanning calorimetry (DSC) technique and electrical resistancemeasurement of the samples. Results show that endothermic effects in the thermograms of the alloy between 180°Cand 240°C can be related to the enthalpy of GPzones dissolut...

Although the vapor-liquid-solid growth of semiconductor nanowire is a non-equilibrium process, the equilibrium phase diagram of binary alloy provides important guidance on the growth conditions, such as the temperature and the equilibrium composition of the alloy. Given the small dimensions of the alloy seeds and the nanowires, the known phase diagram of bulk binary alloy cannot be expected to ...