The gas-phase laser-induced photofragmentation of tris(methyl vinyl ketone) tungsten(0) is studied, and the photoproducts are identified by time-of-flight mass spectroscopy. The initially populated excited electronic state of the complex is attributed to metal-to-ligand charge transfer by analysis of the electronic and preresonance Raman spectra. The major metal-containing photofragmentation pr...

Fretting experiments were conducted on the (10 0) crystal (cubic) face of a single crystal Ni-base superalloy in two directions, /10 0S and /110S, to study the effect of crystallographic orientation on the fretting response in both partial slip and gross slip regimes. The study involved point contacts using a tungsten carbide (WC) ball with radius 10 mm tested at room temperature. Ball indentat...

Within the scope of increase in cutting tools efficiency, a CW CO;! laser beam has been used for butt welding sintered tips containing cobalt and tungsten carbide to a medium carbon steel core. After optimization of the laser processing conditions, full penetrating, sound and homogeneous welds are observed. Hardness is found to be nearly constant across the entire weld bead cross-section. Micro...

The authors describe a technique for melt infiltration casting of composites with a metallic-glass matrix. We made rods 5 cm in length and 7 mm in diameter. The samples were reinforced by continuous metal wires, tungsten powder, or silicon carbide particulate preforms. The most easily processed composites were those reinforced with tungsten and carbon steel continuous wire reinforcement. The Zr...

A novel electrocatalyst of layered MoS2 supported on reduced graphene oxide (RGO) decorated with nano-sized tungsten carbide (WC) shows an enhanced catalytic performance in the hydrogen evolution reaction, which could be attributed to the presence of a conductive and electrocatalytically-active nano-WC dispersant and the positive synergistic effect between nano-WC/RGO and layered MoS2.

Forty two of 125 former workers in a factory in Syracuse, New York, which manufactured hard metal parts from tungsten carbide and cobalt, were studied by chest radiographs, spirometry, and plethysmographically determined lung volumes. The plant was closed in 1982 and the studies were performed in 1983-5. Recorded measurements of carbide dust concentrations were only mildly excessive by modern s...

An investigation of the performances in Fischer-Tropsch reaction of 1wt% M/WC(X) (M = Co, Ru; X = A, B), where A is a tungsten carbide protected by free carbon and B is a clean tungsten carbide, was carried out. Supported catalysts performances were compared to those of the parent tungsten carbides at 473 K and 20 bar. It was found that WC(A) produces mainly hydrocarbons but also 20-40% alcohol...