The strength of sheathed wall systems is substantially greater than unsheathed walls with the same studs. Testing on studs sheathed on both sides with dry gypsum board demonstrate strength increases as large as 70% over unsheathed studs (Miller and Peköz 1993, Miller and Peköz 1994). The current AISI Specification for sheathed wall stud systems are complicated, only apply when the sheathing is ...

According to the different construction forms of PBL shear connectors in steel-concrete composite beam and steel-concrete joint section, eight finite element models in two groups of the two construction forms are conducted to study different mechanical properties of PBL shear connectors. Following conclusions can be drawn from the finite element method calculation results. The load-slip curve, ...

This is a numerical study to investigate the behavior of novel stiffened angle shear connectors embedded in solid concrete slabs at both ambient and elevated temperatures. An advanced nonlinear finite element model developed validated with available experimental work by Nouri, K., et al. 2021. Additionally, parametric studies are performed evaluate variations strength connector’s dimensions. Th...

Historically, the design of the in-stope pillar in underground excavations has been based on empirical formulae and numerical modelling. Although these design methods have been extensively applied in several gold mines in South Africa, rockburst, in-stope pillar burst/failure are continuously reported as the major problem faced by mines. Therefore, this study attempts to compare the performance...

A precast concrete deck-steel beam-connection (PCSC) connector using ultra-high-performance (UHPC) as post-cast has been proposed to enable rapid on-site construction of assembled composite bridges. This paper aims optimize the structure PCSC connectors finite element (FE) model maximize material utilization and economic efficiency. refined FE comprising bond degradation at steel–UHPC interface...

There is an increasing need to determine accurately the strength properties of tendons for an effective ground control on mines and underground structures as well as on modelling simulations. The strength properties of cables, used as cable bolts, have been evaluated mainly by their ultimate tensile strength, as this kind of test can be carried out in the field as well as in the laboratory. Onl...

Experimental investigation was conducted on corroded composite push-out specimens to study the behavior of shear studs subjected to fatigue loading. A total of eight standard EC4 push-out specimens were tested. The expected corrosion rate of test specimens ranged from 0 to 50%. The main purpose of these tests was to determine the fatigue life and the reduction effect caused by the corrosion on ...