in this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from isfahan steel mill for cement. the control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. the slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...

in this paper, the effect on the strength properties of high strength concrete (hsc) manufactured with silica fume (sf) and ground pumice (gp) is investigated. portland cement was replaced with sf, gp and combination of sf and gp up to 25%. 22 different concrete mixtures with these replacement ratios were produced by using 0.25 water-binder ratio. the ultrasound pulse velocity, compressive, spl...

the purpose of this research was to evaluate the application of recycled aggregates of constructiondebris such as concrete, cement block and rubbles from pars-kangan site in asphalt concrete mix design. toevaluate the performance of aggregates different mix designs with recycled aggregate percentages of 0, 10,30, 50 and bitumen percentages of 4, 4.5, 5, 5.5, 6, and 6.5 were provided and two mar...

The effects of adding Nano-Silica particles on the compressive strength and water permeability of concrete and its comparison with that of Micro-Silica were investigated in this work. The effect of combination of Nano- silica and Micro-silica were also studied in this work, which resulted in an increase in compressive strength of concrete in comparison with other concrete specimens tested in th...

This paper investigated the effects of seawater curing of concrete made by Micro-Nano Air Bubbles (MNAB) on compressive, flexural and tensile strengths of the concrete. This product will be applicable for rehabilitation or repair of coastal RC structures. In this research, the effect of different combinations of concrete ingredients including 0-100, 25-75, 50-50, 75-25, and 100-0 percent ...

In this research, the performance of ultrasonic pulse velocity (UPV) in concrete is examined as a nondestructive experiment in order to estimate mechanical (compressive and tensile strength) and durability (water absorption) properties of fiber-reinforced self-compacted concrete For this purpose 11 mixture designs containing 3 types of fibers (steel: 0.1, 0.2, 0.3 and 0.4 percent by volume, Pol...

With many years of construction and application of common concrete, researchers have always been searching for a better composition. One of the notable ideas for achieving such a composition is using recycled materials. One of the materials which is suitable for environment and constant development is damaged tires .For studying mechanical properties of concrete containing tire particles, a ser...

By increasing the demolition of old concrete structures and the interest of civil industries to consume cheaper materials, using Recycled Concrete Aggregate (RCA) can cause environmental protection and decrease the construction costs. On the other hand, the high potential of Recycled Aggregate Concrete (RAC) in concrete industry was established by extensive experimental researches were performe...

Hybrid fiber reinforced concrete (HFRC) consisting of two or more different types of fibers has been widely investigated because of its superior mechanical properties. In the present study, the effect of the addition of steel (0.25%, 0.5%, 0.75%, and 1% of concrete volume) and Polypropylene (0.2%, 0.4%, and 0.6% of concrete volume) fibers on the surface scaling resistance of concrete, depth of ...

Steel corrosion of bars in concrete structures is a complex process which leads to the reduction of the cross-section bars and decreasing the resistance of the concrete and steel materials. In this study, reliability analysis of a reinforced concrete beam with corrosion defects under the distributed load was investigated using the enhanced Hasofer-Lind and Rackwitz-Fiessler (EHL-RF) method base...