Contamination types, levels and their behavior within drilling wastes is determined by the local geological conditions and drilling mud design; notably lubrication fluids, weighting agents and anti-foaming agents. Such additives can contain potentially toxic elements such as aluminum and barium. Besides being contaminated, drilling wastes often have a high pH due to the addition of lime, causti...

a r t i c l e i n f o In many mining, civil, and petroleum engineering applications diamond bit drilling is widely used due to high penetration rate, core recovery and its ability to drill with less deviation. Recently, many research have been conducted to estimate the penetration rate of diamond drilling which can be considered as one of the most important parameters in project planning and co...

OBJECTIVES In this study we evaluated heat generation during the low-speed drilling procedure without irrigation. MATERIALS AND METHODS Ten artificial bone blocks that were similar to human D1 bone were used in this study. The baseline temperature was 37.0℃. We drilled into 5 artificial bone blocks 60 times at the speed of 50 rpm without irrigation. As a control group, we drilled into an addi...

Oil and gas well drilling activities are associated with numerous hazards which have the potential to cause injury or harm for people, property and the environment. These hazards are also a threat for the reputation of drilling companies. To prevent accidents and undesired events in drilling operations it is essential to identify, evaluate, assess and control the attendant risks. In this work, ...

Drilling procedure is widely used in orthopedic surgery to position reduced fractured bones and prosthetic components. However, successful execution of bone drilling requires a high level of dexterity and experience, because the drilling resistance is large and sometimes vibrates violently to difficultly grasp the hand-piece or even break the slender drill. This paper introduces haptic function...

The article describes the dynamics of drill bits, drilling modes, distribution resistance forces when with bits. theory a well arbitrary shape, possible shapes contacting figures at bottom hole and type bit operating in rotation pair mode are considered. This has properties double center rotation, which results attrition drilling. At same time, during drilling, load on will be located throughou...

In this research, finite element analysis of the conventional drilling and vibration assisted drilling is carried out. The ABAQUS software is employed for FE analysis. The Johnson-Cook models for both plastic deformation and damage are employed for FE simulation.The results of the FE analysis are then verified with experimental results in both conventional and vibration assisted drilling on Al ...

Bone fracture due to an accident, aging or diseases is a feature of everyday life. One of the principal methods of repair and reconstruction of such a fracture is based on drilling the bone and fixing its separate parts together using screws, wires and plates. Morphology of the drilled hole surface and fixative components such as screws, pins and hooks influences strength of the bonds between t...

The dynamic model of a drill in drilling process was proposed and investigated in this study. To assure a good drilling quality, the vibration variation on the drill tips during high speed drilling is needed to be investigated. A pre-twisted beam is used to simulate the drill. The moving Winkler-Type elastic foundation is used to characterize the tip boundary variation in drilling. Due to the v...

The main affecting parameter for Delamination of the composites and in turn the failure of composites is the Thrust force. In the present work an attempt has been made in order to investigate the Thrust force generated during drilling of the TiO2 and ZnS filled Glass Fabric Reinforced Polymer Matrix Composites (GFRP). The volume fractions in the matrix were chosen as 1, 2 and3%. A plan of exper...