We have developed a sensor module containing high-bandwidth VOC and gas sensors (including novel acoustic, custom MOX and low-cost NDIR) to evaluate the concentration of gases in a hazardous environment. We report upon the initial characterization of two MOX gas sensors (1 mm × 1 mm) with coatings of Pd/Pt doped SnO2 and pure WO3 inside a wind tunnel to plumes of acetone and ethanol (<10 ppm). ...

Ag@SnO2 nanosheets were prepared through a hydrothermal method followed by heat treatment and liquid reduction process. Many Ag nanoparticles (Ag NPs) dispersed uniformly over the surface of SnO2 nanosheets. The thickness was approximately 10 nm. After decoration with NPs, nanosheet sensors exhibited improved gas-sensing behaviors compared to pure sensor. response cross-linked decorated NP for ...

Reducing the working temperature and increasing sensitivity selectivity has always been a research hotspot in field of MOS based gas sensors. In this work, improved triethylamine (TEA) sensing performance mechanism SnO2 by doping Pd have investigated. nanoparticles Pd-SnO2 with different amounts (0%, 0.1%, 0.3%, 0.5%, 0.7%) were successfully prepared hydrothermal method. The size is very unifor...

A SnO2 transparent thin-film transistor (TTFT) is demonstrated. The SnO2 channel layer is deposited by RF magnetron sputtering and then rapid thermal annealed in O2 at 600 ̊C. The TTFT is highly transparent, and enhancement-mode behaviour is achieved by employing a very thin channel layer (10–20 nm). Maximum field-effect mobilities of 0.8 cm2 V−1 s−1 and 2.0 cm2 V−1 s−1 are obtained for enhancem...

The pellet-type SnO2 sensor was synthesized by the solid state method and the effects of additives such as nano ZnO (1-12 mol %) and nano In2O3 (1-10 mol %) on the CO gas sensitivity of sensor were investigated. The optimum sintering temperature was chosen 800°C because of the porosity content of the samples. The phase analysis and microstructure of the samples were studied by x-ray diffraction...

SnO2 is one of the most employed n-type semiconducting metal oxide in chemo-resistive gas-sensing although it presents serious limitations due to a low selectivity. Herein, authors introduce 1D SnO2-SiO2 core-shell nanowires (CSNWs). The amorphous SiO2-shell layer with varying thicknesses (1.8–10.5 nm) grown onto (NWs) by atomic deposition (ALD). SiO2-coated CSNWs show dramatic improvement sele...

We fabricated nitrogen dioxide (NO2) gas sensors with p-type carbon nanotubes (CNTs) / n-type tin (SnO2) nanoparticle heterojunctions using one-step dielectrophoretic assembly and investigated the effect of CNT/SnO2 ratio on their NO2 detection properties. CNTs SnO2 nanoparticles were mixed in various ratios, suspended deionized water, assembled by dielectrophoresis. The normalized response het...

In this paper, we report the first time preparation of SnO2 nanoparticles (NPs) using a green chemistry method. The leaf extract of Plectranthus amboinicus was used as reducing and stabilization agent for synthesizing SnO2 NPs. The synthesized SnO2 NPs were characterized by SEM, EDX, XRD and UV-vis spectroscopy. Results showed that the biosynthesized SnO2 NPs owing a high purity. The photocatal...

SnO2/nitrogen-doped graphene nanohybrids have been synthesized by an in situ hydrothermal method, during which the formation of SnO2 nanocrystals and nitrogen doping of graphene occur simultaneously. The as-prepared SnO2/nitrogen-doped graphene nanohybrids exhibit enhanced electrochemical performance for sodium-ion batteries compared to SnO2/graphene nanocomposites. A systematic comparison betw...