Substantial amounts of post-consumer scrap are exported to other regions or lost during recovery and remelting, and both export and losses pose a constraint to desires for having regionally closed material cycles. To quantify the challenges and trade-offs associated with closed-loop metal recycling, we looked at the material cycles from the perspective of a single material unit and trace a unit...

Ductile iron is one of the most important engineering materials, in view of its excellent castability, signifi cantly better mechanical properties and low cost [1, 2]. It represents the fastest growing segment of the iron market. In the medium term, it is to be expected that the market share of nodular iron will level off at 40 % to 45 % [3]. Achieving the full potential of ductile iron require...

Based on safety and quality principles, for each medical device (MD), regardless of its declared status as single- or multi-use device, careful considerations must be made. This includes assessment whether reprocessing is economical and ecological meaningful, and technical feasible. So far, however, in Germany reprocessing of declared single use MD is legally allowed, provided that the above as...

Operational uncertainties create disincentives for use of recycled materials in metal alloy production. One that greatly influences remelter batch optimization is variation in the raw material composition, particularly for secondary materials. Currently, to accommodate compositional variation, firms commonly set production targets well inside the window of compositional specification required f...

This paper presents an analysis of the use of iron and steel in the UK and explores how much of the iron and steel is recycled when it becomes obsolete after use. The first part of this paper series investigated production and consumption trends of iron and steel in the UK, whereas this paper focuses on scrap generation and recycling. Information on the amounts of iron and steel going into diff...

In a laboratory study, decolourisation of real textile dyeing wastewater by modified solar photo-Fenton (Steel scrap/ H2O2 ) process under irradiation with sunlight was examined. Batch experiments were conducted to determine optimal operating conditions .The optimal doses of H2O2 and steel scrap were 15 mL/L and 1 g/L, respectively at pH 3.Colour removal of 89% was obtained under optimum condit...

The upgrade recycling of cast-iron scrap chips towards β-FeSi₂ thermoelectric materials is proposed as an eco-friendly and cost-effective production process. By using scrap waste from the machining process of cast-iron components, the material cost to fabricate β-FeSi₂ is reduced and the industrial waste is recycled. In this study, β-FeSi₂ specimens obtained from cast iron scrap chips were prep...

Nigeria is blessed with abundant iron ore deposits of nearly 3 billion tonnes and other basic minerals for steel production including coal and limestone. Yet the Nigerian steel sector has collapsed principally due to shortage of raw materials particularly iron ore for the integrated steel plants and billets for the rolling mills. The privatization of the steel sector that was done in 2004-2005 ...

The effect of adsorption to elemental iron on the reductive transformation of 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5-trinitro-1,3,5-triazine (royal demolition explosive [RDX]) in aqueous solution was studied with scrap iron and high-purity iron. In batch experiments with the same total iron surface area and a mixing rate of 100 rpm, TNT and RDX were removed from the solution within 30 ...