introduction: advanced oxidation processes (aops) suggest a highly reactive, nonspecific oxidant namely hydroxyl radical (oh•), that oxidize a wide range of pollutants fast and non-selective in wastewater and water. materials and methods: in this work, the nitrogen-doped titanium dioxide nanoparticles were primed by sol-gel method, characterized by x-ray diffraction and scanning electron micros...

in this present study the dissolved air flotation (daf) system was investigated for the treatment of kermanshah oil refinery wastewater. the effect of three parameters on flotation efficiency including of flow rate (outflow from the flotation tank), saturation pressure and coagulant dosage on chemical oxygen demand (cod) removal was examined experimentally. all the experiments were done under a...

in order to reduce the costs associated with poly-β-hydroxybutyrate production, growth and poly-β-hydroxybutyrate production of ralstonia eutropha were studied in batch culture on different carbon sources. experiments were designed and conducted to not only lower the cost of poly-β-hydroxybutyrate production by using inexpensive substrates, but also to increase poly-β-hydroxybutyrate production...

the present research surveyed the effect of five factors including: microwaves power, air temperatures and its flow rates, microwaving time onset and amount of substances on the requested time and energy for combined fluidized bed- microwaves drying of black raspberry into 50% dry base wet content. response surface methodology and central composite was used as experimental design. multiple line...

In this work, response surface methodology (RSM) and artificial neural network (ANN) were used to predict the decolorization efficiency of Reactive Red 33 (RR 33) by applying the O3/UV process in a bubble column reactor. The effects of four independent variables including time (20-60 min), superficial gas velocity (0.06-0.18 cm/s), initial concentration of dye (50-150 ppm), and pH (3-11) were i...

There have been many productive methods developed so far for optimization of multiple response surface (MRS) problems. This paper tends to review the most seminal approaches in MRS and discuss the strength and weakness of each of the approaches through existing aspects in MRS. A numerical example is included to compare results by different methods. Finally some of the prominent areas for future...

Response surface methodology (RSM) is a statistical method useful in the modeling and analysis of problems in which the response variable receives the influence of several independent variables, in order to determine which are the conditions under which should operate these variables to optimize a corrugated box production process. The purpose of this research is to create response surface mode...

Defects of the roll forming process are affected by amount and situation of the strains distribution. The effect of the process parameters on the strain distribution in the round cross section roll forming process has been studied. Finite element and response surface method have been used for process modelling. Then desirability functions approach and overlaid counter plots have been employed f...

Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...