The cerebroprotective effects of copper aspirinate [dimeric copper(II) bis(o-acetoxybenzoate)] were investigated in gerbils subjected to 10-min global cerebral ischemia followed b 60-min reperfusion. The results showed that intragastric copper aspirinate (7.5, 15.0 and 30.0 mg Kg(-1)) markedly promoted the recovery of the electroencephalogram amplitude, attenuated the increase of lipid peroxide...

A new, cost-effective, and environmental-friendly cloud point extraction methodology was described for enrichment of copper, manganese and nickel in several water samples. The method involves the complexation of copper, manganese or nickel with 2-amino-6-(1,3-thiazol-2-diazeyl)-phenol at pH 7.0, then extraction into Triton X-114. After dilution of the surfactant-rich phase with acidified methan...

Copper-based fungicides can be effectively digested by treatment with a mixture of concentrated sulfuric and nitric acid in exactly 15 minutes for the rapid determination via copper using flame atomic absorption spectrometry (AAS). Under optimum conditions, the results of copper fungicide analysis were consistent to those obtained by the AOAC’s recommended method. Recovery values ranged from 98...

The elementary and phase analysis of discarded copper ores from Yongping of China has been performed. The experiments of extracting copper from the discarded copper ores were done with the mixed bacteria obtained through a series of enrichment, separation, domestication and combination tests. The results show that in the process of bioleaching, the pH value rises at first and drops gradually. T...

Printed Circuit Boards (PCBs) collected from local sources were used for recovering copper by electrolytic process, using a laboratory reactor setup of working volume 15 liters and nitric acid for dissolution. Copper plate was used as the cathode and graphite rod as the anode for the deposition process. Five durations were adopted both for the dissolution and deposition processes. Based on the ...

Cyanidation is the main process for gold and silver recovery from its ores. In this study, a process is proposed to recover copper and cyanide from barren solutions from the Merrill-Crowe cementation process with zinc dust. This technology is based on inducing nucleated precipitation of copper and silver in a serpentine reactor, using sodium sulfide as the precipitator, and sulfuric acid for pH...

Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...

BlastAlloy 160 (BA160) is a low-carbon martensitic steel strengthened by copper and M2C precipitates. Heat-affected zone (HAZ) microstructure evaluation of BA160 exhibited softening in samples subjected to the coarse-grained HAZ thermal simulations of this steel. This softening is partially attributed to dissolution of copper precipitates and metal carbides. After subjecting these coarse-graine...

The utility of employing biogenerated ferric iron as an oxidant for the recycling of scrap metal has been demonstrated using continuously growing cells of the extremophilic organism Acidithiobacillus ferrooxidans. A ferric iron rich (70 mol%) lixiviant resulting from bioreactor based growth of A. ferrooxidans readily solubilized target scrap metal with the resultant generation of a leachate con...

Flotation is the most important process for concentrating mineral ores. This process may occur in any vessel such as column flotation, which has been used widely during the last decade and the conventional flotation cells. The effect of superficial feed velocity on the copper recovery was investigated using pilot-scale column flotation of "Sarcheshmeh Capper Complex". The results were compa...