Membrane fouling is a major obstacle for ultrafiltration (UF) in water treatment. Here, strategy mitigation, by applying an ultra-low concentration of moderately-hydrophobic chitosan (MHC) and using mildly elevated backwash temperature was proposed. The effects MHC type, concentration, were investigated continuous-flow tests PVDF hollow fiber membranes model raw water. Compared to the process w...

The compression of 300-fs-long, chirp-free laser pulses at 527 nm down to 30 fs is reported. The laser pulses, originated from a frequency-doubled, mode-locked Nd:glass laser, were compressed by a 0.7-m-long, 150-microm-bore-diameter, argon-filled hollow fiber, and a pair of SF10 prisms with a final energy of 160 microJ. These are the shortest, high energy pulses ever produced by direct pulse c...

Throughout the last 50 years, many improvements have been made for a more effective oxygenator. A large plate type membrane oxygenator, used by Clowes, and a coil type, used by Kolff, has evolved into the small hollow fiber oxygenator. The complex bubble oxygenator, or rotating disk oxygenator, has become a small disposable bubble oxygenator. The currently available oxygenators are extremely sm...

one of the most important concerns in tehran municipal landfill is the production of leachate and its potential for water resources pollution, this study was undertaken to examine feasibility of biological and physico/chemical treating of high-strength landfill leachate that was collected from tehran municipal landfill. average cod of the leachate in aerobic submerged membrane bioreactor is 680...

A hollow fiber sampling inlet end of capillary electrophoresis (CE) for small ions in complex samples is described. A short piece of hollow fiber, which only permits small ions to pass through its wall, was directly connected to one end of a capillary. Small ions in complex samples were injected into the capillary through the hollow fiber by an electrokinetic method. The experimental results of...

poly(vinylidene fluoride) (pvdf) nanofibers were prepared via electrospinning process. several different factors influence on this process and application of experimental design for its optimization is of great importance. the central composite design (ccd) was used for planning and optimizing of the experiments and also, the analysis of variance (anova) was employed for the statistical validat...

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The sp...

this research is on the improvement of the procedure to determination of trace levels of antidepressant drug; fluoxetine in wastewaters. in this research a silica based sol-gel was applied for the extraction of fluoxetine from water samples. this two-phase technique is consisting of aqueous samples of fluoxetine (donor phase) and silica based nanocomposite prepared by sol-gel technique (accepto...