Abstract: A novel converter that can directly transform electrical, wind, hydraulic and other types of mechanical energy into thermal energy is presented in this study. First, the thermal energy of the converter is classified and then calculated by a finite element method. The eddy current distribution in the stator of the converter is also discussed. Second, the temperature field of the conver...

This thesis aims to identify and analyze the nonlinear behavior in the threephase voltage source converter, which is widely used as an interface converter in a distributed hybrid power system (DHPS). In this system, the converter does not work as a standalone converter but operates as a subsystem that connects to a non-ideal power grid and interacts indirectly with other subsystems via a point ...

The neutral beam injection generate ultra-high temperature energy in the tokamak of nuclear fusion. The neutral beam injection make up arc power supply, filament power supply and acceleration & deceleration power supply. The arc power supply has characteristics of low voltage and high current. Arc power supply generate arc through constant output of voltage and current. So this paper proposed s...

The matrix converter has many advantages in wind power system applications. Matrix converter is compact and highly efficient because it directly converts generated power from AC generator to AC grid without intermediate DC bus while conventional back-to-back converter systems requires many electrolytic capacitors in DC link bus which are bulky and have short life-time. Matrix converter has both...

Abstract: In many power factor correction applications, the power level can reach maximum value and sometimes the input voltage also will be too high. For high power and high voltage applications the inductor volume and weight is the major concern of the conventional boost converter. In this paper the two inductor boost converter is adopted which uses smaller inductors yielding high power densi...

Abstract—The power buck converter is the most widely used DC/DC converter topology. They have a very large application area such as DC motor drives, photovoltaic power system which require fast transient responses and high efficiency over a wide range of load current. This work proposes, the modelling of DC/DC power buck converter using state-space averaging method and the current-mode control ...

Multi-port DC-DC converter has attracted special interest in applications where multiple energy sources are used. In this project, a three-port converter with three active full bridges, two LCC resonant tanks, and a three-winding transformer is proposed. It uses a single power conversion stage with high-frequency link to control power flow between batteries, load, and a renewable source such as...

A Power Factor Correction Using singleinductor dual-output buck-boost converter operating in critical conduction mode is proposed in this paper. Each output of the SingleInductor Dual-Output buck-boost converter can be regulated independently by multiplexing a single inductor, Compared with a conventional two-stage multiple-output converter, the singleinductor dual-output buck-boost converter b...

The flyback converter type single-stage converter and a half wave rectifier with time-multiplexing control (TMC) for power factor correction is proposed. It has the advantage of better magnetic core utilization and better performance for high power applications. The major portion of the input is transferred to the load through ac-dc conversion. And the part of the input power is delivered to th...

A detailed model of wind power station, including Double Fed Induction Generator, DFIG is presented in this paper. Two control mechanisms are included in the model. The inner control system uses stator flux oriented control for the rotor side converter and grid voltage vector control for the grid side converter. The outer control system is used for wind turbine pitch angle. PSCAD/EMTDC is us...