The 70SiO2-15TiO2-15ZrO2 membrane was prepared by a sol-gel procedure. The corrosion behavior of microporous toplayers along with the membrane characterization in terms of pore size, surface area, pore volume and weight loss is described. The final ceramic membrane with a thickness of 400 nm and uniform surface was obtained. This membrane confirmed the fine microporous characteristic with mean ...

Fluid compressibility has a major influence on the efficiency of switch-mode hydraulic circuits due to the release of energy stored in fluid compression during each switching cycle and the increased flow rate through the high-speed valve during transition events. Multiple models existing in the literature for fluid bulk modulus, the inverse of the compressibility, are reviewed and compared with...

This paper presents a new methodology, apparatus design, and the experimental results of ongoing research into the measurement of the mechanical properties of musculoskeletal tissue at the cellular level. A microchamber was constructed that provides a controlled hydrostatic pressure environment for these cells where optical sectioning, via epifluorescence microscopy, was used to acquire volume ...

One-dimensional consolidation of soils is conveniently divided into three portions, viz., (1) initial compression, (2) primary consolidation, and (3) secondary consolidation. Such a classification involves the clear implication that the three effects proceed in that order. Initial one-dimensional compression of saturated clays is negligible because of the low compressibility of the pore water. ...

Pore volume is one of the main properties for the characterization of microporous crystals. It is experimentally measurable, and it can also be obtained from the refined unit cell by a number of computational techniques. In this work, we assess the accuracy and the discrepancies between the different computational methods which are commonly used for this purpose, i.e, geometric, helium, and pro...

River bed and bank protections should be designed regarding unsaturated soil conditions. Natural surface and pore water are not ideal incompressible fluids. Microscopic gas bubbles are dispersed in both of them. Due to the compressibility of such fluids delayed pore water reactions can be observed when external pressure changes act on such a medium. This paper deals with the results of laborato...

Pvlercury porosimetry was used to measure the bulk and real densities, pore volumes and pore size distributions of compacts of hydroxyapatite before and after sintering. The hydroxyapatites were prepared by two different methods and had widely different surface areas. The properties were determined as a function of compaction force and sintering temperature. Densities from porosimetry were in g...

Advanced techniques have greatly promoted the exploitation of shale gas from shale matrix with low permeability. But the gas transport mechanism in shale is still unclear. Due to the multi-scale pore systems in a shale reservoir, viscous flow, slip flow, Knudsen diffusion and adsorption/desorption should be applied to the flowing equation so that it can properly predict gas flow dynamics. Multi...