Here we report the first example of a class of additively manufactured carbon fiber reinforced composite (AMCFRC) materials which have been achieved through the use of a latent thermal cured aromatic thermoset resin system, through an adaptation of direct ink writing (DIW) 3D-printing technology. We have developed a means of printing high performance thermoset carbon fiber composites, which all...

Owing to a higher melt viscosity compared to the thermoset plastics the impregnation of the textile reinforcement structure with a thermoplastic matrix is significantly difficult. Commingled hybrid yarns produced on the basis of air-jet texturing technique have the potential for a homogeneous distribution of reinforcement and matrix filaments over the yarn cross section. The so achieved very sh...

The compressive response of polymer matrix fiber reinforced unidirectional composites (PMC’s) is investigated via a combination of experiment and analysis. The study accounts for the nonlinear constitutive response of the polymer matrix material and examines the effect of fiber geometric imperfections, fiber mechanical properties and fiber volume fraction on the measured compressive strength an...

1. Abstract Natural fibers are being increasingly used to substitute artificial glass and carbon fibers in polymer composites. It is important to know how the mechanical properties of these natural fiber composites compare with those of the traditional glass and carbon fiber composites. Glass and carbon fiber composites are currently being used in many applications that may not require such hig...

In this research work, impact strength of untreated, alkali treated, potassium permanganate treated, benzoyl chloride treated and acrylic acid treated areca fiber reinforced epoxy composites were studied under 40%, 50%, 60% and 70% fiber loadings. Impact strength increased with increase in fiber loading up to 60% and then showed a decline for all untreated and chemically treated areca fiber rei...

Materials Research Group (CMRG) at the University of Mississippi (UM) have recently begun a research study supported by the U. S. Department of Agriculture (NRICSREES-USDA Award number 2003-35504-13627) examining natural fiber reinforcements (NFR). The objectives of this research are to demonstrate the feasibility of using the cost-effective pultrusion process to manufacture high quality polyme...

Fiber-reinforced laminated composites are frequently preferred in many engineering projects. With the development in production technology, the using of the fiber reinforced laminated composites has been increasing in engineering applications. In the production stage of the fiber-reinforced laminated composites, porosities could be occurred due to production or technical errors. After a level o...

In this article, hybrid composite laminates with shape memory alloy (SMA) and glass fiber (GF) as the reinforced phase, and epoxy resin as the host material, were manufactured by vacuum-assisted resin injection (VARI) processing. The SMA wires were embedded into the GF/epoxy composites with three kinds of modes. The effect of SMA content and the position on the flexural, low-velocity impact per...

Aiming at demonstrating the potential of unidirectional natural fiber-reinforced thermoplastic composites in structural applications, textile flax yarn/thermoplastic polyester composites with variable fiber volume fractions have been manufactured by a filament-winding process followed by a vacuum-assisted compression molding process. The microstructure of the composites shows that the flax fibe...