This paper describes the use of nanoskiving to fabricate complex metallic nanostructures by sectioning polymer slabs containing small, embedded metal structures. This method begins with the deposition of thin metallic films on an epoxy substrate by e-beam evaporation or sputtering. After embedding the thin metallic film in an epoxy matrix, sectioning (in a plane perpendicular or parallel to the...

We present results on the leveling of polymer microdroplets on thin films prepared from the same material. In particular, we explore the crossover from a droplet spreading on an infinitesimally thin film (Tanner's law regime) to that of a droplet leveling on a film thicker than the droplet itself. In both regimes, the droplet's excess surface area decreases towards the equilibrium configuration...

thin film phthalocyanines(pc), incloding zinc, iron, and magnesium phthalocyani-nes, were prepared by vacuum deposition method. chronocoulometry was used to study the charge transfer reaction mechanism of ionic species through the thin films. the results obtained in chronocoulometric studies shows that the thin film phthalocyanines could operate via two mechanisms.the first mechanism metal pc t...

We have used thermal treatment and rubbed polyimide alignment layers to produce large domains of poly(9,9dioctylfluorene-co-bithiophene) alternating copolymer (F8T2). The direction of rubbing on the polyimide surface determines the orientation of these domains, allowing us to create thin-film transistors with channel lengths parallel and perpendicular to the liquid crystal polymer director. We ...

We investigate the creation of large area mesoscale structures by controlling the dewetting pathways of thin polymer films on physically heterogeneous substrates comprising a two-dimensional (2-D) array of square pillars. Depending on the initial configuration and thickness of the film, dewetting produces a variety of both ordered and disordered structures. The substrate pattern strongly influe...

Morphology of conjugated polymers is a critical factor that significantly affects intrinsic charge transport characteristics and in turn performance of polymer-based devices. Morphological defects including misaligned crystalline grains and grain boundaries significantly impede efficient charge hopping between transport sites, resulting in degradation of device performance. Therefore, one impor...

Polymer-like thin films have been deposited on glass and silicon substrates at temperatures in the range 300–673 K, by a plasma enhanced chemical vapor deposition (PECVD) method using thiophene (C H S) as a precursor. A power with radio 4 4 frequency (13.56 MHz) was applied for the ignition of the plasma, and hydrogen and Ar(argon) were used as the bubbler and the carrier gases, respectively. I...

mn doped zno nanocomposite thin film coated on glass by a simple spin-coating method was used to degrade an azo textile dye from aqueous environment. mn doped zno nanocomposite thin film was characterized by means of x-ray diffraction (xrd) and scanning electron microscopy (sem). the photo-reduction activity of photocatalyst was evaluated using an azo textile dye as organic contaminant irradiat...

Despite extensive efforts, a definitive picture of the glass transition of ultra-thin polymer films has yet to emerge. The effect of film thickness h on the glass transition temperature T(g) has been widely examined, but this characterization does not account for the fragility of glass-formation, which quantifies how rapidly relaxation times vary with temperature T. Accordingly, we simulate sup...

The hydrogen-bonded polymer complex thin film of poly(2-ethyl-2-oxazoline) (PEOX) and poly(acrylic acid) (PAA) was fabricated with layer-by-layer (LbL) assembly. The film shows exponential growth at early stage and transfers to linear growth after 10 assembling cycles, and the stable thickness increment per assembling cycle in the linear region could be higher than 100 nm. The film growth shoul...