This study examined the properties of fresh and hardened concretes as influenced by the moisture state of the coarse recycled concrete aggregates (RCA) after surface treatment. Surface treatment was performed by immersing the coarse RCA in a calcium metasilicate (CM) solution. The treated coarse RCA was maintained in three controlled moisture states, namely, air-dried, oven-dried, and saturated...

Abstract—In this study, the Compressive strength of concretes made with Ground Granulated Blast furnace Slag (GGBS), Pulverised Fuel Ash (PFA), Rice Husk Ash (RHA) and Waste Glass Powder (WGP) after they were exposed 780C (exposure duration of around 60 minutes) and then allowed to cool down gradually in the furnace for about 280 minutes at water binder ratio of 0.50 was investigated. GGBS, PFA...

Introduction: The heavyweight concretes have been widely used for constructing medical or industrial radiation facilities with photon sources. Materials and Methods: In this study, heavy concretes containing galena (PbS) and several borated minerals are proposed as suitable materials against photons. The shielding properties of 21 galena concretes containing seven borated minerals with three m...

The effect of modification asphalt concrete mixtures different grain sizes with “Ric-Polycell” (Ukraine) and “Duroflex®-SMA” thermoplastic polymers (Germany), which were added directly to the mixer during their preparation, on properties was studied. It is confirmed that it more expedient use stone mastic concretes a larger size mineral crushed grains high-traffic roads, as they are rutting-res...

Mixtures of mineral aggregate and modified sulfur, wherein the modified sulfur functions as a binder, are termed sulfur concretes or sulfur mortars depending on the form of the mineral aggregate. Molten sulfur reacted with olefinic additive, at 130-140 ºC, and then mixed with preheated filler and aggregates. Sulfur mortar samples were prepared by mixing 32 % molten sulfur, 10 % filler and 5...

This paper presents the influence of Hybrane H 1500 as a hyperbranched polymer on kinetic parameters of dyeing compounded fiber grade PET polyethylene terephthalate at boil temperature. C.I. Disperse Red 324 as a disperse dye was used for dyeing compounded fiber grade PET. The result was compared with corresponding properties of virgin PET. The dyeing rate constants and diffusion coefficients a...

This study comparably assessed the pozzolanic effect of silica fume (SF) and ground rice husk ash (RHA) as supplementary cementing materials on the properties of blended cement pastes and concretes. A commonly commercial silica fume (SF) and locally-produced rice husk ash (RHA) samples with two finenesses (one with larger size than cement and the other with smaller size than cement) were used i...