In this research, novel functionally graded Ni-P coating was deposited with electroless process. The content of phosphorus was controlled to change gradual through the thickness of the coating. During the plating, bath temperature and pH were changed at specified intervals to obtain functionally graded structure. To compare the properties of functionally graded coating with Ni-P single-layer co...

In this work, Poly(ethyleneterephthalate) (PET) substrate was treated using KOH solution and was modified using hybrid O-I coating containing PCL )polycaprolactone( as organic phase and TEOS )tetraethoxysilane( as inorganic phase. The coating was prepared through a sol-gel process and applied on the surface by dip coater. Then, electrically conducting polythiophene (PTh) nanoparticles were depo...

XRD and EDX analyses confirmed the presence of Ag in all coatings deposited using electrochemical method and silver. The mean thickness coating was noted to be highest in EHA/AG group (102.20 4.20 um) followed by PHA (76.40 2.20 um). Mean coating thicknesses in other groups were: PHA/AgNO3 (76.20 1.29 um); EHA (32.98 2.50 um); EHA/ Ag/2-layers (30.70 2.40 um); EHA/AgNO3 (8.60 0.60 um). The aver...

• GNP incorporated in alumina matrix to deposit composite coatings via SPS. Raman analysis confirmed retention of as-processed coatings. Improved mechanical and tribological properties achieved for Wear mechanisms monolithic coating were revealed. Graphene possesses high fracture toughness excellent lubrication properties, which can be exploited enhance performance systems utilized combat wear....

The surfaces of hydoxyapatite ceramics were modified by the precipitation of octacalcium phosphate coating from aqueous solution and the biomimetic method synthesized nanohydroxyapatite coatings. Both coatings were deposited as continuous and uniform layers. It was demonstrated that the octacalcium phosphate coating was inappropriate for in-vitro osteoblast proliferation despite of good initial...

In this study, Al2O3, TiO2 and Al2O3+ 3wt%TiO2 coatings were deposited on AZ31 Mg alloy substrate by plasma spraying. The structurally characterized scanning electron microscopy X-ray diffraction. Corrosion experiments carried out in 3.5% NaCl solution. Adhesion tests performed according to daimler benz VDI-3198 standard. A coating layer of approximately 70 microns thickness was deposited. High...

TiO2 coatings deposited using reactive magnetron sputtering and spray coating methods, as well as Agand Mo-doped TiO2 coatings were investigated as self-cleaning surfaces for beverage processing. The mechanical resistance and retention of the photocatalytic properties of the coatings were investigated over a three-month period in three separate breweries. TiO2 coatings deposited using reactive ...

In this study, nanowires/nanowalls were generated on a silicon wafer through a chemical etching method. Octadecyltrichlorosilane (OTS) was deposited onto the nanowire/nanowall surfaces to alter their hydrophobicity. The hydrophobic characteristics of the surfaces were further modified via a 1.5-μm-thick layer of n-octadecane coating on the OTS-deposited surface. The hydrophobic characteristics ...

Abstract: Two different coating microstructures of Ni-50Cr alloy were obtained on a stainless steel substrate by changing combustion characteristics of a high velocity oxy-fuel (HVOF) process and the size distribution of feed powder during coating process. Use of the finer feed powder and leaner fuel in oxygen/fuel ratio (i.e. using a ratio much less than stoichiometric ratio) led to formati...

Fracture behavior in the tensile testing of a single-crystal silicon (SCS) microstructure with stepwise bias-graded hydrogenated amorphous carbon (a-C:H) coating was investigated to explore fracture mechanism coating−substrate system. All sides SCS (120 × 4 5 μm3) were coated uniformly 300-nm-thick a-C:H film deposited by plasma enhanced chemical vapor deposition (PECVD). In this research, four...