This paper has been investigated a technique that predicts the performance of a bar-type unimorph piezoelectric vibration actuator depending on the frequency. This paper has been proposed an equivalent circuit that can be easily analyzed for the bar-type unimorph piezoelectric vibration actuator. In the dynamic analysis, rigidity and resonance frequency, which are important mechanical elements,...

Analyses of Power Output of Piezoelectric Energy Harvesting Devices Directly Connected to a Resistive Load Using a Coupled Piezoelectric-Circuit Finite Element Method Meiling Zhu, Emma Worthington and James Njuguna Department of Materials, Department of Sustainable Systems Cranfield University, Bedfordshire, MK43 0AL UK Abstract A coupled piezoelectric-circuit finite element model (CPC-FEM) is ...

Within the Vibration Piezoelectric Energy Harvesting (VPEH) framework, this paper investigates and designs an optimal piezoelectric harvester (PH) under stochastic real-time vibrations using a step-by-step guideline from electrical mechanical perspective. A stochastic-excitation high-order-shear-deformation finite element (FE) method, with experimental verifications, analyzed trapezoid non-unif...

1. Abstract This paper addresses the problem of elastic and piezoelectric parameter estimation in active laminated structures with surface bonded sensors and actuators. The proposed technique is non destructive as the only experimental data it uses are natural frequencies of free vibration of the structure. Emphasis is placed on the influence on the estimated parameters of the adhesive material...

In this paper, the influence of the elastic foundation on the free vibration and buckling of thin-walled piezoelectric-based functionally graded materials (FGM) cylindrical shells under combined loadings is investigated. The equations of motion are obtained by using the principle of Hamilton and Maxwell's equations and the Navier's type solution used to solve these equations. Material propertie...

A novel exciting method for a sandwich type piezoelectric transducer operating in longitudinal-bending hybrid vibration modes is proposed and discussed, in which the piezoelectric elements for the excitations of the longitudinal and bending vibrations share the same axial location, but correspond to different partitions. Whole-piece type piezoelectric plates with three separated partitions are ...

This paper relates to vibration control using passive electrical shunt circuits. However, the vibration shunt control efficiency relies on the optimization of the vibration energy transfer between a structure and a Lead-Zirconate-Titanate (PZT) piezoelectric ceramic material. The problem is further complicated by the material composition of the substrate or host material the PZT is coupled to. ...

Piezoelectric-based nano resonators are smart structures that can be used for mechanical sensors and actuators in miniature systems. In this study, the nonlinear vibration behavior of a curved piezoelectric-layered nanotube resonator was investigated. The structure comprises core slender layer piezoelectric material covering inner where harmonic voltage is applied to layer. Applying energy meth...

The problem of coupled flexural-torsional nonlinear vibrations of a piezoelectrically-actuated microcantilever beam as a typical configuration utilized in microcantilever-based sensing is being investigated. The actuation and sensing are both facilitated through bonding a piezoelectric layer (here, ZnO) on the microcantilever surface. Considering different geometrical configurations for the bea...