in this study, mixed convection heat transfer and local and global entropy generation in aventilated square cavity have been investigated numerically. the natural convection effect isachieved by a constant heat flux imposed at the bottom wall and cooled by injecting a coldfollow. in order to investigate the effect of port location, four different placementconfigurations of the inlet and outlet ...

The rarefied flow of nitrogen with speed ratio ͑mean speed over most probable speed͒ of S =2,5,10, pressure of 10.132 kPa into rectangular nanochannels with height of 100, 500, and 1000 nm is investigated using a three-dimensional, unstructured, direct simulation Monte Carlo method. The parametric computational investigation considers rarefaction effects with Knudsen number Kn= 0.481, 0.962, 4.81...

Flow boiling through microchannels is characterized by nucleation of vapor bubbles on the channel walls. In parallel microchannels connected through a common header, formation of vapor bubbles often results in flow mal-distribution that leads to reversed flow in certain channels. One way of eliminating the reversed flow is to incorporate flow restrictions at the channel inlet. In the present st...

An observational program applying a broad suite of in-situ and boat-based remote sensing tools to the New River inlet and its interaction with the ocean was implemented during the RIVET I experiment. Of particular interest was the flow of the river through and within the inlet; wave breaking within the inlet as a result of shoaling and wave-current interactions; and the fate, dilution, and tran...

abstract for investigating the effect of bed form in alluvial channels on the amount of bed load transport, a set of experiments was carried out in a tilting flume under unsteady flow conditions (hydrograph). the produced hydrographs were in triangular form with a maximum discharge of 30 to 45 lit/s/m. three size of sediment particles were used with equal to 1.5, 2.1 and 3.0mm, clear water with...

A computational study was performed to explore the aerodynamic performance of a streamline-traced, externalcompression inlet designed for Mach 1.664 at off-design conditions of freestream Mach number, angle-of-attack, and angle-of-sideslip. Serious degradation of the inlet performance occurred for negative angles-of-attack and angles-of-sideslip greater than 3 degrees. At low subsonic speeds, t...