The results of an ongoing FEM parametric study are presented regarding the dependence of the resulting piled raft behavior under lateral load and combination of loads on pile diameter, pile length, arrangement of piles and raft thickness. Taguchi method with Analysis of Variance (ANOVA) was employed to calculate the contribution ratio of these factors on the lateral displacement of piled raft. ...

this research examines the behavior of soil-reinforced piles and applied loads based on the analytical method and by using the numerical results of flac3d software for comparison with the analytical results. the analysis was based on a method called virtual retaining wall, the following into consideration: an imaginary retaining wall that passes the footing edge the bearing capacity of footing ...

Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimat...

We investigate the stability of a granular monolayer composed of spherical grains on an inclined plate. When the tilt angle alpha increases, some reorganizations are observed throughout the pile. The packing fraction rho of the packing evolves by successive jumps. Those discontinuous events precede the collapse of the pile at a critical angle alphac. The occurrence of precursors before avalanch...

Remediation of slope failures requires stabilization alternatives that address causes of slope instability. Slope reinforcement and pile stabilization systems, if properly designed, are effective in preventing slope movements in weak soils. Soil load transfer to pile elements from the lateral soil movement as occurs in slope failures is a complex soil-structure interaction problem, and the sign...

Approved for public release; distribution is unlimited. 1. Purpose. This manual provides information, foundation exploration and testing procedures, load test methods, analysis techniques, allowable criteria , design procedures, and construction consideration for the selection, design, and installation of pile foundations. The guidance is based on the present state of the technology for pile-so...

Received: June 12, 2017 Revised: October 24, 2017 Accepted: November 03, 2017 Abstract: Background and Objective: Prestressed high strength concrete pipe pile (PHC) shows brittle fracture when subjected to more than its own bearing capacity. Therefore, the non-prestressed steel bar is added to the PHC pipe pile, that is, the mixed reinforced pipe pile (PRC). The mechanical behavior of PRC group...

In this paper, pile behavior embedded in layered soil deposits subjected to seismic loadings is analyzed using a nonlinear fiber element for simulation of soil – pile interactions. In the created model, both pile and surrounding soil are modeled using fiber elements in a practical Beam on Nonlinear Winkler Foundation (BNWF) concept. Herein, the features of DRAIN–3DX finite element software are ...

A quasi-three-dimensional finite element method of analysis is proposed for the dynamic response analysis of pile foundations that is computationally feasible for practical applications. The method uses a simplified three-dimensional wave equation for describing the dynamic response of the soil. The response of the pile foundation is computed directly without having to use pile–soil–pile intera...

We investigate the collapse of granular rodpiles as a function of particle (length/diameter) and pile (height/radius) aspect ratio. We find that, for all particle aspect ratios below 24, there exists a critical height Hl below which the pile never collapses, maintaining its initial shape as a solid, and a second height Hu above which the pile always collapses. Intermediate heights between Hl an...