The compact variation of equilateral triangular microstrip antenna, a shorted 600 Sectoral microstrip antenna is discussed. The proximity fed shorted 600 Sectoral microstrip antenna is proposed which gives simulated and measured BW of more than 700 MHz (>60%). To increase the bandwidth and gain, gap-coupled configuration two Shorted 600 Sectoral patches is proposed. It yields simulated and meas...

II. THEORY AND SIMULATION Abstract— A novel THz device concept called as CW HTS (high temperature superconductive) photomixer/antenna is proposed. Optical heterodyne photomixing in the DC-biased HTS strip has been employed to create THz signal, and the size of the strip on the grounded dielectric substrate is designed to have an efficient broadside radiation. Incorporating the HTS microstrip co...

Here we made an attempt to maximize the gain of microstrip patch antenna. To achieve this we used microstrip circular patch antenna at 5.8 GHz frequency ISM Band Application. Single FSS (frequency selective surface) substrate is used to increase efficiency. Parameters are set accordingly and results of microstrip patch antenna with FSS layer and microstrip patch antenna without substrate later ...

Microstrip leaky-wave antenna fed by an aperture-coupled microstrip operating at K-band is presented. Using the aperture-coupled microstrip as a feeding structure can fully exploit the wideband characteristic of the microstrip leakywave antenna. The dimensions of the antenna are obtained from the calculation of the propagation characteristics. Measurement shows a bandwidth of 22% for VSWR < 2 :...

This paper describes the performance analysis of different feeding technique for wireless microstrip patch antenna i.e for wi-max applications. In this paper four types of feeding techniques (Microstrip line feed, coaxial probe feed, proximity coupled feed and aperture coupled feed) are used. From the four feeding techniques, microstrip line and coaxial probe feeds are contacting scheme, in whi...

Despite the many advantages of microstrip patch antennas, they do have some considerable drawbacks. One of the main limitations with patch antennas is their inherently narrowband performance due to its resonant nature. With bandwidth as low as a few percent; broadband applications using conventional patch designs are limited. So for the antenna miniaturization and bandwidth improvement H-shaped...

To find the optimum location of an active device i.e., Gunn diode in the Active tapered Slot-Ring Antenna (ASRA) equivalent {ABCD} matrix parameters has been used, so that the best performance in antenna characteristics is realized in terms of power radiated and power received. Microstrip tapered slotring antenna was fabricated by using a 0.787mm thick Takonic TLY-5-0310-CH/CH substrate with r...

Some useful features of microstrip patch antennas are low profile, low weight and easy fabrication. However this type of antenna suffers from having a low gain, caused by propagation surface waves. In this paper, a new near zero refractive index metamaterial (MTM) unit cell is designed and fabricated as a superstrate over a Rectangular Microstrip Patch Antennas (RMPA). In order to obtain a maxi...

Nb-based superconductor–insulator–superconductor (SIS) mixers with Nb tuning circuits have demonstrated good results up to the Nb gap frequency. Above the gap frequency the performance is expected to degrade quickly because RF loss in Nb becomes significant. In this paper we present the results of an effort to extend Nb-based SIS mixers to THz frequencies by employing lower-loss normal-metal Al...

Abstract—A microstrip 180◦ phase shifter obtained by a novel design of Microstrip-to-Coplanar Waveguide (CPW)-to-Microstrip transition is presented. The proposed phase shifter is obtained without changing the layer of the second microstrip line. Via holes are used to transfer the current from the top to the bottom substrate layer and vice versa. The presented phase shifter is operating in a wid...