In recent years, the development and use of polymeric nanocomposites in creating advanced materials has expanded exponentially. A substantial amount of research has been done in order to design polymeric nanocomposites in a safe and efficient manner. In the present study, the impact of processing parameters, such as, barrel temperature, and residence time on the mechanical and thermal propertie...

Thermal behavior of plastic materials can be improved by knowing thermal degradation kinetics for the optimal design and operation of pyrolysis process. In the present study, thermogravimetric analysis has been used for the non-isothermal kinetic study of waste high-density polyethylene pyrolysis under nitrogen atmosphere at different heating rates 10, 20 and 40 °C/min. The kinetic parameters, ...

The effect of substrate interferences from high-density polyethylene (HDPE) on the ability to associate an ignitable liquid residue with the corresponding liquid standard, using statistical procedures, is demonstrated. Gasoline, kerosene, and lighter fluid, at three different evaporation levels, were spiked onto HDPE and subsequently burned to generate simulated ignitable liquid residues (ILRs)...

The experiment was conducted in three model drinking water distribution systems (DWDSs) made of unplasticized polyvinyl chloride (PVC), silane cross-linked polyethylene (PEX) and high density polyethylene (HDPE) pipes to which tap water was introduced. After 2 years of system operation, microbial communities in the DWDSs were characterized with scanning electron microscopy, heterotrophic plate ...

Contamination of food products by spoilage and pathogenic microorganisms during post process handling is one of the major causes for food spoilage and food borne illnesses. The present green sustainable approach describes the covalent immobilization of papain to LDPE (low density polyethylene), HDPE (high density polyethylene), LLDPE (linear low density polyethylene) and PCL (polycaprolactam) w...

The effects of alkaline copper quaternary (ACQ) and zinc borate (ZB) on the resistance of corn stalk fiber (CSF)-reinforced high-density polyethylene (HDPE) composites to biodegradation were examined. Both biocides could inhibit termites, mold fungi, and wood-decay fungi, even at high CSF formulations (i.e., 60%). Additionally, ACQ enhanced the resistance of the composite materials to certain b...

Abstrac: In this paper, the mechanical properties of high density polyethylene (HDPE grade 3840) produced by Bandare ImamIran, mixed with the wood and bagasse as fillers with 10-50 % w/w have been studied. The maximum tensile strength was observed at 10% w/w of fillers ratio. The elongation, impact strength and fracture energy were decreased with increasing of fillers ratio while the Young modu...

Concerns regarding plastic debris and its ability to accumulate large concentrations of priority pollutants in the aquatic environment led us to quantify relationships between different types of mass-produced plastic and metals in seawater. At three locations in San Diego Bay, we measured the accumulation of nine targeted metals (aluminum, chromium, manganese, iron, cobalt, nickel, zinc, cadmiu...

Simultaneous thermogravimetry-mass spectrometry studies of a pyrolytic decomposition of mixtures of different plastic wastes/coking coal were carried out. The investigation was performed at temperatures up to 1000oC in a helium atmosphere under dynamic conditions at a heating rate of 25 oC/min. Five thermoplastics, commonly found in municipal wastes: low density polyethylene (LDPE), high densit...