modified cellulose acetate (ca) membranes were prepared by dissolving the polymers in a mixture of acetone (ac) and n, n dimethylacetamide (dmac) (70:30) solvent and deionized (di) water was used in the coagulation bath. the introduction of polyethylene glycol (peg) additive and tio2 nanoparticles (nps) into the casting solution has changed the structures of the resulting membranes during the p...

The recovery of high-quality, valuable end products from cheese whey is a very important industrial process. The aim of this study is to improve the recovered protein content of concentrate stream in cheese whey. The experiments were conducted by using ceramic ultrafiltration (UF) membrane followed by diafiltration (DF) process with a 15kDa molecular weight cut-off (MWCO). The volume concentrat...

Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...

The application of low pressure membranes (microfiltration/ultrafiltration) has undergone accelerated development for drinking water production. However, the major obstacle encountered in its popularization is membrane fouling caused by natural organic matter (NOM). This paper firstly summarizes the two factors causing the organic membrane fouling, including molecular weight (MW) and hydrophili...

Pressure retarded osmosis (PRO) has the potential to produce clean, renewable energy from natural salinity gradients. However, membrane fouling can lead to diminished water flux productivity, thus reducing the extractable energy. This study investigates organic fouling and osmotic backwash cleaning in PRO and the resulting impact on projected power generation. Fabricated thin-film composite mem...

This paper deals with the time-optimal operation and parameter estimation problem of a general diafiltration process in the presence of fouling. Fouling stands for one of the dominant problems in the membrane separation processes. The dynamic behavior of the fouled membrane is described by a general fouling model taken from literature. An Extended Kalman filter is proposed for the recursive est...

Organic matter leads to one of the biggest problems in membranes: fouling. Developing efficient cleaning processes is therefore crucial. This study systematically examines how alginic acid fouling formed under different physical and chemical conditions affect osmotic backwashing cleaning efficiency in forward osmosis (FO). The fouling layer thickness before and after osmotic backwashing was mea...

Pre-treatment is normally required to reduce or control the fouling of ultrafiltration (UF) membranes in drinking water treatment process. Current pre-treatment methods, such as coagulation, are only partially effective to prevent long-term fouling. Since biological activities are a major contributor to accumulated fouling, the application of an oxidation/disinfection step can be an effective c...

Anaerobic membrane bioreactor (AnMBR) can produce high-quality effluents through effective solid-liquid separation using microfiltration. During the operation of the membrane bioreactor system, membrane fouling is one of the main problems. Several models have been proposed to understand the mechanisms of fouling of the membrane. Usually, cake formation and pore blocking are found to be the main...

Membrane fouling during particle filtration occurs through a variety of mechanisms, including internal pore clogging by contaminants, coverage of pore entrances, and deposition on the membrane surface. Each of these fouling mechanisms results in a decline in the observed flow rate over time, and the decrease in filtration efficiency can be characterized by a unique signature formed by plotting ...