aisi 4340 steel is one of the super strong steels that can be selected for different applications. by designing theproper cycles of heat treatment, the optimum microstructure and properties of this steel can be achieved. in thisstudy, different heat treatment cycles were introduced to achieve the optimum microstructure and improve themechanical and magnetic properties of aisi 4340 steel. the re...

medium density fiberboard (mdf) was produced using moist depithed bagasse stored dry or wet. the duration of storage for either method varied between 0 to 4 months. two steaming temperatures of 175c and 185c were also used. mdf boards were produced in the laboratory and the common mechanical and physical properties were measured and compared. results showed that an increased steaming temperat...

physicochemical and mechanical properties of wheat grains can have a great impact on the quality of the final products (bread). therefore, correct selection of wheat cultivar for specific applications seems to be crucial. in this study, the differences in the physicochemical and mechanical properties (under compression and impact loadings) of ten iranian wheat cultivars (azar2, alamut, bam, bah...

the development of nano/ultrafine bainitic structure in aisi 52100 steel was the goal of this study. for this purpose,the aisi 52100 the specimens were austenitized at 1050 °c for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. the austempered samples were characterized using field emissionscanning electron microscopy (fesem), x-ray diffraction (xrd...

in this paper, a new method is proposed for the production of mwcnts/pvc (multi-walled carbon nanotubes/ polyvinyl chloride) nanocomposites. in this method, a spray is used to produce layers of carbon nanotubes within a pvc matrix. various parameters influence the production of the nanocomposite and its mechanical properties. these parameters are studied separately and the effect of each of par...

nanocomposites based on polyamide 6/polypropylene  )pa6/pp 67/33) blend containing 2.5 to 10 phr of nano-caco3  and 5 phr of maleated polypropylene )pp-g-mah) as compatibilizer were prepared by melt compounding followed by injection molding. the mechanical properties, water absorption, as well as shrinkage behavior were characterized and the morphology was studied using scanning electron micros...

nanoclay/triphenyl phosphate hybrid system was employed to examine the fire retardancy and mechanical properties of pc/abs blends. each of the polymers and their blends are widely used in the automotive, electrical andelectronic industries. because most thermoplastics are easily combustible they need to be flame retarded to reduce the burning rate especially in the initial phase of a fire incid...