This paper presents investigation carried out, including experimental and numerical studies, on low-rise shear-dominated brick masonry structures for the calculation of force reduction factor R. Basic experimental tests were conducted on masonry constituent materials for mechancial characterization. In-plane quasi-static cyclic tests were conducted on twelve full scale brick masonry walls, to u...

The paper presents a plastic analysis procedure based on the energy balance concept for performance based seismic retrofit of multi-story multi-bay masonry infilled reinforced concrete (R/C) frames with a ‘soft’ ground story using passive energy dissipation (PED) devices with the objective of achieving a target performance level of the retrofitted R/C frame for a given seismic hazard level at t...

an experimental study is conducted on three ½ scales, single-story, single-bay, frame specimens. the first specimen was a reinforced concrete frame with solid-brick infill. the second specimen was a reinforced concrete frame with hollow clay perforated-brick infill. the last specimen was a reinforced concrete frame without any infill. these three specimens were tested by pseudostatic method. di...

This paper presents a new numerical tool for evaluating the vibration frequencies and mode shapes of masonry buildings in the presence of cracks. The algorithm has been implemented within the NOSA-ITACA code, which models masonry as a nonlinear elastic material with zero tensile strength. Some case studies are reported, and the differences between linear and nonlinear behaviour highlighted.

1. Abstract Topology optimization is employed to define the geometry of the cross-section of any masonry block that minimizes its thermal transmittance, with the aim of maximizing the thermal insulation of masonry buildings. Constraints on the mechanical properties of the block are also prescribed. The effect of the design constraints on the optimal layout of the blocks is investigated. The the...

Citation: Furukawa A, Kiyono J, Parajuli RR, Parajuli HR and Toki K (2017) Evaluation of Damage to a Historic Masonry Building in Nepal through Comparison of Dynamic Characteristics before and after the 2015 Gorkha Earthquake. Front. Built Environ. 3:62. doi: 10.3389/fbuil.2017.00062 Evaluation of Damage to a Historic Masonry Building in Nepal through Comparison of Dynamic Characteristics befor...

Walls of corridors and chambers in the Neolithic dolmens of Portugal and Spain were constructed using megalithic slabs or masonry. When constructed with slabs, the slabs were arranged using two very different construction systems, based either on placement of an orthostat or on imbrication of the slabs. Although generally dolmens are described with orthostats, on the Iberian Peninsula are most ...

Many single or multispan arch bridges are strengthened with the addition of some kind of structural support between adjacent arches of multispan or beside the arch barrel of a single span to increase the strength of the overall structure. It was traditionally formed by either placing loose rubble masonry blocks between the arches and beside the arches or using mortar or concrete to construct a ...

During the last decades natural polymers have become more and more frequent to replace traditional inorganic stabilizers in building materials. The purpose of this research is to establish a comparison between the most conventional building material solutions for load-bearing walls and a type of biomaterial. This comparison will focus on load-bearing walls as used in a widespread type of twenti...

The vulnerability of buildings on coastal dikes due to overtopping wave impacts is difficult to assess. A method is developed in this paper to quantify the vulnerability of masonry buildings on a coastal dike exposed to wave overtopping. Using previous studies, the accidental loads due to the extreme wave impacts are characterized. Using the approach from Eurocode 6, the strength of masonry bui...