Due to the recent droughts, the retube of Sezela evaporators was delayed for a few years, resulting in a need for a low cost carbon steel tube to retube five evaporators. A recent failure highlighted the importance of the heat treatment and expansion characteristics of these tubes. This paper discusses the failure of a carbon steel tube, the development of the heat treatment of locally manufact...

The effect of strain rate on the flow stress of a low carbon high strength ferritic steel that contains nanometer size Cu–Ni–Al precipitates is found to be much less than that of HSLA 65 that does not have such precipitates. This result is in agreement with the theory that such precipitates locally lower the Peierls stress for screw dislocations in body-centered cubic iron. The fracture mode in...

The study reports the mechanical property and microstructure of cold rolled low carbon steel and its work-hardening behavior in the deformation process. The tensile test in room temperature of low carbon steel was implemented for the different cold rolling deformation, the stress-strain curve was draught according to the relationship between strength and deformation and fitted for the polynomia...

A process was developed for fabricating arrays of micro-channels in shape-memory NiTi for bone implant applications, with a tailorable internal architecture expected to improve biomechanical compatibility and osseointegration. Ni-51.4 at.% Ti with 24-34 vol.% porosity was fabricated by electrochemical dissolution of parallel layers of steel wire meshes embedded within a NiTi matrix during hot p...

This paper studied effects of ultrasonic treatment during the solidification process on structure formation of low carbon steel. Results showed that with ultrasonic treatment grains were refined and the steel ingot avoided the cast widmanstatten structure. When ultrasonic treatment was employed, pearlite was broken and the average length of pearlite was decreased from 550mm to 140mm. The corres...

In the present paper, changes in mechanical properties of Portland cement-based mortars due to the addition of carbon nanotubes (CNT) and corrosion of embedded steel rebars in CNT cement pastes are reported. Bending strength, compression strength, porosity and density of mortars were determined and related to the CNT dosages. CNT cement paste specimens were exposed to carbonation and chloride a...

Press hardening steel has become a much used material in car body manufacturing due to its excellent safety and lightweight potential. In some recent car models press hardening steel has reached already a weight share of more than 20% in the body structure while it is estimated that it could reach even around 40% in the future. However conventional press hardening steel based on the alloying co...

High-strength low alloy steels (HSLA) have been designed to replace high-yield (HY) strength steels in naval applications involving impact loading as the latter, which contain more carbon, require complicated welding processes. The critical role of HSLA-100 steel requires achieving an accurate understanding of its behavior under dynamic loading. Accordingly, in this paper, we experimentally inv...

a low carbon al-killed ti-added steel was produced in mobarakeh steel complex in iran. mechanical properties and microstructural characterizations of steel in the as-cast, hot-rolled, cold-rolled and annealed conditions are presented. dilatometery tests were carried out to measure the finishing and annealing temperatures of steel. it was found that the addition of small amounts of ti increased ...