A process was developed for fabricating arrays of micro-channels in shape-memory NiTi for bone implant applications, with a tailorable internal architecture expected to improve biomechanical compatibility and osseointegration. Ni-51.4 at.% Ti with 24-34 vol.% porosity was fabricated by electrochemical dissolution of parallel layers of steel wire meshes embedded within a NiTi matrix during hot p...

Investigations were conducted on low-carbon steel and the steel with same chemical composition with addition of microalloying element niobium. While tensile testing was carried out, the thermographic measurement was tacking place simultaneously. A specific behavior of niobium microalloyed steel was noticed. Test results have shown that, in the elastic deformation region, thermoelastic effect oc...

a proposed method for protecting carbon steel and hence reducing iron release in an aqueous solution saturated with h2s is presented in this paper. the method is based on forming a stable and resistant sulfide layer (pyrite, fes2, or pyrrhotite, fe(1-x)s, phase or a mixture of both) on the carbon steel surface. the study on the formation of the sulfide layer was carried out considering the effe...

There is an increasing demand for using high sensitive sensors which can detect very low levels of magnetic flux leakage from hidden defects or far-side wall loss due to pitting or local corrosion in ferromagnetic steels. This paper discusses the use of highly sensitive tiny GMR sensors for detection of sub-surface defects in carbon steel plates. Notches located at different depths below surfac...

A transient finite-element model (CON2D) is applied to compute temperature, stress, and distortion of the steel shell during initial solidification. The model incorporates temperaturedependent properties, thermal shrinkage, phase transformations, and different elastic-viscoplastic constitutive equations for each phase (liquid, d, and c). The effects of sudden metal level fluctuations are simula...

A new permeameter has been built and is now available for testing samples of steel and other ferromagnetic materials for their magnetic characteristics such as permeability, remanent induction, coercive force and saturation induction. The present range of operation for the permeameter is from 0.5 Oe to 1250 Oe. Results are presented for two samples of low-carbon steel as well as some preliminar...

An effective way of assessing corrosion in pipelines before serious consequences occur is to use tools that can predict the future of a pipeline through an understanding of its present state and the mechanisms of corrosion. In this work electrochemical methods such as liner and tafel polarization resistance were used to evaluate corrosion. Most metal corrosion occurs via electrochemical reactio...