This paper will define the slag compositions required to obtain and control optimum foamy slag conditions in the Electric Furnace. In defining the optimal slags, consideration is given to the effects of scrap quality, carbon injection, slag basicity and MgO content. A computer model based on published phase-diagrams has been developed which graphically maps the chemistries for optimal foaming c...

air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag, and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. from this perspective the further use of these materials can have its own merits. air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional properti...

This paper aims at bringing a literature review on the uses and properties of popular industrial and mineral byproduct slag. At the present, most industrial slags are being used without taking full advantage of their properties or disposed rather than used. The use of slag in replacing Portland cement by GGBFS is not very common. The traditional way to utilize metallurgical slags in cementing m...

in this study, slag penetration into a magnesia refractory monolithic was investigated by the crucible test method. a synthetic calcium aluminate slag system has been used to study commercial magnesia mix refractory for 1, 2, 3, 4, 5 and 6 hours at 1450°c and 1600°c. it has been shown that the penetration rate is controlled by a diffusion mechanism at 1450°c. in this case, capillaries are the ...

Metallurgical slag, including ferrochrome slag is internationally recognized as suitable material for use in road construction and as aggregate for concrete (Rossouw et al. 1981, Lind et al. 2001). Contrary to international practice, metallurgical slag – including ferrochrome slagis classified as hazardous waste that must be de-listed before use in other applications (DWAF 1998). Having adopted...

The shortage of waste landfill space for waste disposal and the high demand for fill materials for land reclamation projects in Singapore have prompted a study on the feasibility of using spent copper slag as fill material in land reclamation. The physical and geotechnical properties of the spent copper slag were first assessed by laboratory tests, including hydraulic conductivity and shear str...

Experiments have been conducted to study the effect of addition of fly ash, copper slag, and steel and polypropylene fibres on compressive strength of concrete and to determine the hierarchical order of influence of the mix variables in affecting the strength using cluster analysis experimentally. While fly ash and copper slag are used for partial replacement of cement and fine aggregate, respe...

Batch experiments were conducted to evaluate the ability of steel slag in removing manganese from aqueous solution. Several variables had been setup to evaluate the performance of steel slag to remove manganese from aqueous solution in different experimental condition. The variables include contact time, size, dosage, pH and initial concentration of manganese. The equilibrium contact time was a...

Microstructural and mechanical properties of alkali activated binders based on blends of Colombian granulated blast furnace slag (GBFS) and fly ash (FA) were investigated. The synthesis of alkali activated binders was conducted at 85 °C for 24 h with different slag/fly ash ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Mineralogical and microstructural characterization was carried out b...

The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain r...