In December 2003, the Physikalisch-Technische Bundesanstalt (PTB) started the development of an optical-based primary flow rate standard for application in natural gas under high pressures (up to 5.5 MPa). The concept underlying this technology will be presented in this paper. The technical approach is based on the application of a conventional laser Doppler velocimeter (LDV) as well as on a ne...

The present study deals with a laser Doppler dual-incident-beam velocimeter in reference-beam configuration developed at the Water Jet Lab of the Dipartimento di Meccanica of the Politecnico di Milano and especially designed for water jet applications. The applied experimental procedure makes it possible, once identified the contributors to the uncertainty of the measurand, to apply an analysis...

the effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an acoustic doppler velocimeter (adv). the three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate qs/q0 = 2%located...

Iontophoresis was used for a non-invasive administration of the agonist histamine. Flares and weals areas were measured after 1%, 0.01% and 0.0001% histamine solution iontophoresis (30 s, 1.4 mA/cm2). There was no clear-cut correlation between area and concentration. 0.0001% histamine solution iontophoresis induced only a vanishing redness. When a typical weal developed ( 1% and 0.01% histamine...

This paper presents a three dimensional nonlinear finite element analysis for Concrete Filled Steel Tube (CFST) columns subjected to lateral impact load. The finite element models were developed using commercial code ABAQUS/Explicit, which were validated against the experimental results. The study has been carried out to examine the influence of several parameters such as the length of the tube...

A turbulent mixing layer in a water channel was observed at Reynolds numbers up to 3 x los. Flow visualization with dyes revealed (once more) large coherent structures and showed their role in the entrainment process; observation of the reaction of a base and an acid indicator injected on the two sides of the layer, respectively, gave some indication of where molecular mixing occurs. Autocorrel...

The one-phase flow and the two-phase flow in a fluidic element are investigated by measuring Reynolds stress distributions of the main jets using the laser Doppler velocimeter. In the one-phase flow, a water flow jets from a main nozzle into water and in the two-phase flow, a water fiow jets into air. Some results with the one-phase flow are as follows. When either of the two control ports is c...