The aim of the present work was to investigate the feasibility of Kattamanakku tree leaf powder carbon (KTC) for Acid Red-114 (AR-114) adsorption. The adsorption of AR-114 on KTC material was studied as a function of KTC dose (0.05-1.20g). , solution pH 3-10, contact time and initial concentration (70-380 mg/l)., The influence of these parameters on the adsorption capacity was studied using the...

in this research, adsorption of dibenzothiophene (dbt) as a model of sulfur containing material has been studied by pb exchanged y-zeolite under different experimental conditions. the adsorption was kinetically fast and high adsorption capacity was obtained. the equilibrium adsorption data were analyzed using langmuir and freunlich isotherm models. the corresponding parameters and correlation c...

A low-cost activated carbon (XSBLAC) prepared from XanthocerasSorbifoliaBungehull via chemical activation was investigated to determine its adsorption and desorption properties for zinc(II) ions from aqueous solutions. XSBLAC was characterized based on its N₂-adsorption/desorption isotherm, EDX, XRD, SEM and FTIR results. An adsorption study was conducted in a series of experiments to optimize ...

The chemically crosslinked metal-complexed chitosans were synthesized by using the ion-imprinting method from a chitosan with four metals (Cu(II), Zn(II), Ni(II) and Pb(II)) as templates and glutaraldehyde as a crosslinker. The influences of adsorption conditions, including molar ratios of crosslinker/chitosan and pH changes, were studied. They were used to investigate for comparative adsorptio...

the removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. the results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. the results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution within 40...

the modeling of kinetic and isotherm curves acquired in adsorption of polycyclic aromatic hydrocarbons (pahs) as a model compound (phenanthrene) on activated carbons in the organic solvent. all the runs were carried out in a batch system at atmospheric pressure, process temperature of 24±2°c, and using the 100 ml phenanthrene in cyclohexan. this experimental work was mainly focused on the study...

The presence of arsenic in drinking water is one of the greatest threats to public health. The aim of this experimental investigation was to study the removal efficiency of As(v) from water by application of iron-impregnated activated carbon(Fe-AC). Coating of activated carbon with iron salt was carried out by impregnation method and thermochemical reactions with using of 100 mM FeCl3 solution....

The presence of toxic heavy metals such as chromium (VI) contaminants in aqueous streams, arising from the discharge of untreated metal containing effluents into water bodies, is one of the most important environmental problems. Adsorption is one of the effective techniques for chromium (VI) removal from wastewater. In the present study, adsorbent is prepared from tamarind seeds and studies are...

The adsorption of Basic yellow 2 (BY2), from aqueous solutions onto Granular activated carbon (GAC) and its adsorption kinetics at different concentrations, GAC masses, initial pH values and temperatures were studied. The adsorption process was followed by an on-line spectrophotometric analysis system, which consisted of UV-spectrophotometer, a designed spectrophotometric cell, peristaltic pump...

In this study Ceramium virgatum has been characterized and used for the removal of cadmium and lead from aqueous solutions. The effect of pH, adsorbent dosage, contact time and temperature on adsorption process was studied in batch experiments. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by C. virgatum biomass. The adsorption data can be we...