In the present work, fly ash geopolymer based composites including polyester (PES) waste were studied. Specimens of three compositions were prepared: (a) fly ash geopolymer with 5% PES waste; (b) fly ash geopolymer mortar with 5% PES waste; (c) fly ash geopolymer mortar with 6.25% PES waste. Compressive and bending strength measurements, water absorption test and determination of thermal conduc...

Graded fly ash particles have many useful industrial applications due to its fineness and spherical shape. However, grading of fly ash in an industrial scale is a challenging task. The possibility of using hydrocyclones for this purpose has been demonstrated here based on carefully conducted laboratory experiments. The primary objective of this research is to study the effectiveness of a classi...

There is uncertainty as to the rates of coal fly ash needed for optimum physiological processes and growth. In the current study we tested the hypothesis that photosynthetic pigments concentrations and CO(2) assimilation (A) are more sensitive than dry weights in plants grown on media amended with coal fly ash. We applied the Terrestrial Plant Growth Test (Guideline 208) protocols of the Organi...

In the present work, the ash transformation and deposition behavior during wheat straw and wood waste combustion were investigated by combustion experiments in an entrained flow reactor. The influence of sewage sludge addition on ash chemistry and deposition tendency was also studied. During combustion wheat straw, fine fly ash particles smaller than 2.5 μm are mainly formed due to vaporization...

Large volumes of fly ash and other coal combustion products (CCPs) are produced every year by coal-fired power plants. About 50% of the CCPs produced in the U.S. is buried in impoundment lagoons or dry landfills. Fly ash is generally enriched in several potentially hazardous trace elements, such as As, B, Cd, Co, Cr, Mo, Se, Sr, and V, which can leach from older, unlined disposal sites. Therefo...

To determine dominant factors on arsenic leaching from the coal fly ash, arsenic leaching test under a constant pH was performed. Twelve fly ash samples were collected from two coal fired power plants (600 MWe) having different boiler types. Arsenic in the raw coal was almost all associated with the fly ash in both power plants; however arsenic leaching fraction was strongly differed in boiler ...

A new catalyst was prepared by promoting fly ash with hydrogen peroxide. The catalytic activity of H2O2 promoted fly ash (HPFA) was evaluated by synthesis 5(4H)-oxazolone and imidazolone derivatives under solvent free conditions. The possible mechanisms of synthesis reactions were also suggested. These proposed methods benefit in terms of low-cost catalyst, high yields, ease of workup, survival...

Batch experiments were conducted to test the effects of various solution properties, such as pH, temperature, initial concentration and anoxic and aerobic atmosphere, on Cd removal by nanoscale zerovalent iron (nZVI) supported on industrial coal fly ash. Cd (II) could be removed by adsorption on fly ash-nZVI in a very short time (5 min) with high removal rates (greater than 99.9%) over a wide r...

This paper reports the research and application of high fly ash content concrete (HFCC) with Dipy construction formwork. Concrete construction using Dipy construction formwork can skip the processes of form stripping and concrete vibration. According to the research of the working principle of concrete with Dipy construction formwork, it can be found that cement paste composed of high fly ash c...

In order to effectively raise both utilization rate and additional value of fly ash, X-Ray diffraction (XRD), scanning electron microscope (SEM) and energy-dispersive X-Ray spectrometer (EDS) were used to investigate the morphology, and chemical and mineral composition of the microspheres in fly ash from the Luohuang coal-fired power plant, Chongqing, southwestern China. The majority of fly ash...