Intermetallic precipitates are widely used to tailor mechanical properties of structural alloys but are often destabilized during plastic deformation. Using atomistic simulations, we elucidate structural instability mechanisms of intermetallic precipitates associated with dislocation motion in a model system of Al2Cu. Interaction of non-coplanar <001> dislocation dipoles during plastic deformat...

The diffusion characteristics of Mg–rare-earth diffusion couples were studied. Cylinders of pure Mg and rare earth (Dy, Nd, and Pr) were abutted and annealed at 500 °C for 100 h or 300 h. Point-by-point composition profiles were collected starting in pure Mg, across the diffusion zone, and ending in the pure rare earth, using energy dispersive x-ray spectroscopy with a scanning electron microsc...

The role of Mg2Si in the electrochemical behavior of Al-Si-Mg aluminum alloys has been studied using four experimental aluminum alloys with variations in the Si/Mg molar ratio (A1-0.12, A2-0.49, A3-0.89, A4-1.05), in neutral aerated 0.1M NaCl solutions. Accordingly, the corrosion potential in open circuit (Eoc) and polarization resistance (Rp) were measured. Results show that the augment in Si/...

The quest for solid-state materials with tailored chemical and physical features stimulates the search for general prescriptions to recognize and forecast their electronic structures providing valuable information about the experimentally determined bulk properties at the atomic scale. Although the concepts first introduced by Zintl and Hume–Rothery help to understand and forecast the bonding m...

Abstract Cu 6 Sn 5 intermetallic occurs in the form of differently ordered phases ?, ?? and ???. In solder joints, this can undergo changes composition state order without or while interacting with excess system, potentially giving rise to detrimental mechanical properties solder. study such processes fundamental detail get more detailed information about metastable stable phase equilibria, mod...

The phase evolution during annealing of AlJNi multilayer samples prepared by ion-beam sputtering with composition modulation wavelengths A between 10 and 400 nm was determined using x-ray diffraction and differential scanning calorimeter measurements. Samples with average compositions of &n,N10,6,, and Al,,,N&,~ were investigated. For the Al,,40Ni0.60 samples the following results were obtained...

The joining of lead-free Sn-3.0Ag-0.5Cu (SAC305) solder alloy to metal substrate with the addition of a porous Cu interlayer was investigated. Two types of porous Cu interlayers, namely 15 ppi—pore per inch (P15) and 25 ppi (P25) were sandwiched in between SAC305/Cu substrate. The soldering process was carried out at soldering time of 60, 180, and 300 s at three temperature levels of 267, 287, ...