The influence of precipitation of intermetallics on changes in Young’s modulus of nickel and zirconium base alloys has been discussed in this paper. This study indicates that the change in the modulus due to thermal ageing in these alloys is essentially governed by the change in the modulus of the matrix due to removal of precipitation forming elements. 1.0 Introduction Mechanical properties in...

The Matthias rule, which is an empirical correlation between the superconducting transition temperature (Tc) and the average number of valence electrons per atom (n) in alloys and intermetallic compounds, has been used in the past as a guiding principle to search for new superconductors with higher Tc. The intermetallic compound SrBi3 (AuCu3 structure) exhibits a Tc of 5.6 K. An ab-initio elect...

Replacing noble metals in heterogeneous catalysts by low-cost substitutes has driven scientific and industrial research for more than 100 years. Cheap and ubiquitous iron is especially desirable, because it does not bear potential health risks like, for example, nickel. To purify the ethylene feed for the production of polyethylene, the semi-hydrogenation of acetylene is applied (80 × 10(6) ton...

Investigation on Intermetallic Nickel Aluminides (Ni3Al) was carried to determine the suitability of this material to replace the existing automotive body. The purpose is to produce vehicles which are lighter, more fuel efficient and cause less pollution. One key technical design strategy for improving vehicles efficiency is the light weighting. Attractive properties of Ni3Al including low dens...

The microstructure, phase composition, and microhardness of both gas-atomized and mechanically milled powders of the Al7075 + 1 wt % Zr alloy were investigated. The gas-atomized powder exhibited a cellular microstructure (grain size of a few µm) with layers of intermetallic phases along the cell boundaries. Mechanical milling (400 revolutions per minute (RPM)/8 h) resulted in a grain size reduc...

Bimetallic nanostructures can provide distinct and improved physicochemical properties by the coupling effect of the two metal components, making them promising materials for a variety of applications. Herein, we report composition-selective fabrication of ordered intermetallic Au-Cu nanowires (NWs) by two-step chemical vapor transport method and their application to nano-electrocatalytic gluco...

The b-Al5FeSi intermetallic phase and coarse Mg2Si particles have negative effects on extrudability and workability of 6xxx Al alloys billets. To achieve extruded products with a high surface quality, the as-cast billets are heat-treated before extrusion. During heat treatment, the undesired intermetallic particles, i.e., b-AlFeSi platelets are transformed to rounded a-Al(FeMn)Si intermetallic ...

Intermetallic compounds (IMCs) play a great role in solder joint reliability. Intermetallic formation was studied between SnAgSb solder and Cu substrate of a power package device. The integrity of IMC region is vital to the performance and reliability of the semiconductor packages. The solder joint of the as received packages were subjected to the thermal aging test for 50, 100, 200 and 400 hou...

In the present study, nanocrystalline Ni50Al50-xMox (X = 0, 0.5, 1, 2.5, 5) intermetallic compound was produced through mechanical alloying of nickel, aluminum, and molybdenum powders. AlNi compounds with good and attractive properties such as high melting point, high strength to weight ratio and high corrosion resistance especially at high temperatures have attracted the attention of many rese...