An activated sludge process (ASP) is a biochemical process employed for treating sewage and industrial waste-water, which uses microorganisms and air (or oxygen) to biologically oxidize organic pollutants, producing a waste sludge (or floc) containing the oxidized material. The optimal operation of the biological treatment processes is a challenging task because of the stringent effluent requir...

Vibrio parahaemolyticus, the cause of gastroenteritis in humans, was inactivated by alternating low-amperage electricity. In this study, the application of alternating low-amperage electric treatment to effluent seawater was investigated for the large-scale disinfection of seawater. This method was able to overcome the problem of chlorine generation that results from treatment with continuous d...

The performance of a novel industrial membrane bioreactor (MBR) comprising denitrification, nitrification and ultrafiltration for the secondary treatment of primary treated animal rendering wastewater has been compared with an experimental, low-cost and novel vertical-flow constructed treatment wetland planted with Typha latifolia L. The process wastewater followed pre-treatment by dissolved ai...

Reliable measurements of effluent quality are important for different operational tasks such as process monitoring, online simulation, and advanced control in the wastewater treatment process (WWTP). A kernel principal component analysis (KPCA) and extreme learning machine (ELM) based ensemble soft sensing model for effluent quality prediction was proposed. KPCA was used to extract nonlinear fe...

Across the world 125 to 130 million tons of sugar is produced every year. About 2/3 rd of this is produced from sugarcane and 1/3 rd from sugar beet. Sugar industry play an important role in economic growth of country but the effluent releases from the industry posses abrupt changes to water quality and cause water pollution which eventually causes health hazards. The variety of microbes presen...

ozonation was carried out for decolorization and coD removal of raw and anaerobically treated uAsb (upflow anaerobic sludge blanket) combined industrial (mainly textile) effluent in a lab-scale bubble column reactor. ozonation of anaerobic bioprocess effluent at a dose of 300 mg/h for 10 min resulted in 81% color and 75% coD removal (100 mgo3/80 mg coD) while for raw wastewater 25 min ozonation...

Nanofiltration and reverse osmosis are investigated as a possible alternative to the conventional methods of Cr(VI) removal from model water and industrial effluent. The influences of feed concentration, water recovery, pH, and the coexisting anions were studied. The results have shown that retention rates of hexavalent chromium can reach 99.7% using nanofiltration membrane (NF-HL) and vary fro...

Palm oil processing operation is invariably accompanied by palm oil mill effluent (POME) considered to be an environmental pollutant. While anaerobic digestion and the present tertiary treatment technologies of POME are able to meet the current regulatory effluent discharge requirement of biological oxygen demand (BOD) 100 mg litre – the current limit set by the Department of Environment (DOE) ...

This review discusses cotton textile processing and methods of treating effluent in the textile industry. Several countries, including India, have introduced strict ecological standards for textile industries. With more stringent controls expected in the future, it is essential that control measures be implemented to minimize effluent problems. Industrial textile processing comprises pretreatme...