Inconel 718 is a Ni-Cr-Fe superalloy which presents excellent mechanical properties at high temperatures, as well as good corrosion resistance and weldability. These characteristics can be optimized with an appropriate control of microstructural features such as grain size and precipitation. Precipitates of different nature can form in these alloys, i.e. γ’’ (a metastable metallic compound Ni3N...

In turning process, engineers are often faced with the problems of relating the cutting parameters (Speed, feed, depth of cut) to the output responses(Feed force, Thrust force, Cutting force, Surface roughness) to optimize the process. Also, Turing is done with the aim of achieving the best surface finish. But without optimization, it is not possible to automate the process. Turning process inv...

The application of emulsion for combined heat extraction and lubrication requires continuous monitoring of the quality of emulsion to sustain a desired grinding environment; this is applicable to other grinding fluids as well. Thus to sustain a controlled grinding environment, it is necessary to adopt an effectively lubricated wheel-work interface. The current study was undertaken to assess exp...

Electron yields from clean and oxydized Inconel 625 surfaces have been measured for H', H:, Hef, 0' and Ar+ ions at normal incidence in the energy range 1.5-40 keV. These measurements have been made under ultrahigh vacuum and the samples were freed of surface contaminants by bombarding with high doses of either 20 keV H l or 30 keV Ar+ ions. Differences in yields of oxydized versus clean surfac...

Secondary phases, such as laves and carbides, are formed during the final solidification stages of nickel-based superalloy coatings deposited during the gas tungsten arc welding cold wire process. However, when aged at high temperatures, other phases can precipitate in the microstructure, like the γ'' and δ phases. This work presents an evaluation of the powerful optimum path forest (OPF) class...

The application of accurate constitutive relationship in finite element simulation would significantly contribute to accurate simulation results, which play critical roles in process design and optimization. In this investigation, the true stress-strain data of an Inconel 718 superalloy were obtained from a series of isothermal compression tests conducted in a wide temperature range of 1153–135...

! #"$ ! % '&( )+*, /. 0 ! , 1 " '&( 2 3 4 3 / 657&83 9: !5 ' 2 ! ,

Purpose: A study on the hot deformation behaviour and dynamic structural processes (dynamic precipitation operating during deformation at elevated temperatures) of nickel based superalloy was presented. Design/methodology/approach: Compression tests were carried out on precipitations hardenable nickel based superalloy of Inconel 718 at constant true strain rates of 10-4, 4x10-4s-1 within a temp...