The major part of light weight timber constructions consists of insulation. Mineral wool is the most commonly used insulation due to its cost efficiency and easy handling. The fiber orientation and porosity of this insulation material enables flowthrough. The air flow resistance is low. If leakage occurs in the insulated bay section, the convective flow may cause energy losses and infiltration ...

A high-performance envelope is the prerequisite and foundation to a zero energy building. The thermal conductivity and volumetric heat capacity of a wall are two thermophysical properties that strongly influence the energy performance. Although many case studies have been performed, the results failed to give a big picture of the roles of these properties in the energy performance of an active ...

Abstract Improving the thermal performance of building envelope and reducing energy consumption heat transfer are particularly important for conservation. Wall insulation materials can be divided into sintered non-sintered two types. Sintered wall have unique advantages in development self-insulating because their high strength, good ability wide range raw materials. In this paper, research sta...

The performance of phase change material (PCM) integrated building envelope in terms of peak load reduction, peak load time delay and thermal demand improvement was investigated for a prototype detached single family house in a hot climate location. Five market available PCM layers, which can be easily inserted into traditional wall construction, were selected and coupled into different walls a...

The article presents the results of studies concerning raw hemp shives obtained from Polish crop industrial as a loose-fill thermal insulation material. study focuses mainly on measurements pore size distribution, conductivity and air permeability An increase in value coefficient (0.049–0.052 W/(m·K)) was demonstrated with an bulk density. porosity individual pieces is 78.7% predominant number ...

The windings insulation of electrical machines will remain a topic that is updated frequently. The criteria severity requested by the electrical machine applications increases continuously. Manufacturers and designers are always confronted with new requirements or new criteria with enhanced performances. The most problematic requirements that will be investigated here are the extremely long lif...

In Slovakia, 35% of buildings are older than 50 years but most newer buildings built before 1990 have greater energy consumption. Some other countries also have similar problems. The growing importance of energy saving in buildings can be, in the case of new and old residential buildings (RB), achieved by lowering thermal energy consumption most often by application of polystyrene insulation on...

original article   introduction: a practical solution which is sometimes efficient for noise control in the receiver locations is to enclose workers in an acoustic cabin. accordingly, prediction of the noise insulation performance is regarded as an important aspect of the design a personnel cabin. this study empirically aims to design an acoustic cabin using sandwich panels in a typical metal i...