The effects of NO and NO2 produced by using a plasma jet (PJ) of a N2/O2 mixture on ignition of hydrogen, methane, and ethylene in a supersonic airflow were experimentally and numerically investigated. Numerical analysis of ignition delay time showed that the addition of a small amount of NO or NO2 drastically reduced ignition delay times of hydrogen and hydrocarbon fuels at a relatively low in...

The extremum seeking controller (ESC) that minimizes the unknown performance index is applied to the control of SI (spark ignition) engines in the idle speed region. The proposed control system consists in the three parts, fuel-jet mount controller, ignition-timing controller and engine speed controller. The ESC applied to the engine speed controller should be modified in order to improve the e...

− The paper describes an unusual approach to diagnose standard ignition subsystem of fuel engines. All the information about real state conditions of the ignition coils and sparks is taken from simple measurement of power consumption transient of the electric control systems of engine. The transient is processed by continuous wavelet transformation (CWT). Result of the CWT is used for a classif...

To further grasp the voltage-current characteristics for ignition device of semiconductor bridge and accordingly guide the actual application, the voltage-current characteristics for the bridge body of ignition device of semiconductor bridge are tested in the paper. Firstly, introduce the principle of SCB circuit and provide the connection circuit, device elements to be used and symbolic expres...

In recent years, the industry has shifted toward down-sizing and turbo-charging spark ignition (SI) engines in an effort to increase fuel conversion efficiency. However, this has given rise to a destructive phenomenon known as sporadic pre-ignition (SPI). At low cranking speeds and high loads, engines have been observed to knock violently for brief and infrequent intervals. If allowed to contin...

A rapid compression machine (RCM) test bench is developed in this study. The performance characterization and auto-ignition performance tests are conducted at an initial temperature of 293 K, a compression ratio of 9.5 to 16.5, a compressed temperature of 650 K to 850 K, a driving gas pressure range of 0.25 MPa to 0.7 MPa, an initial pressure of 0.04 MPa to 0.09 MPa, and a nitrogen dilution rat...

Lagrangian PDF investigations are performed of the Sandia piloted flame E and the Cabra H2/N2 lifted flame to help develop a deeper understanding of local extinction, re-ignition and auto-ignition in these flames, and of the PDF models’ abilities to represent these phenomena. Lagrangian particle time series are extracted from the PDF model calculations and are analyzed. In the analysis of the r...

A new rocket ignition mechanism developed at Utah State University, arc-track ignition, is very promising, but its underlying physics are poorly understood. An engineering/physics joint team was formed to investigate the process and suggest avenues for improvement of the technology. The objectives of the team evolved over the course of seven months of research. By the nature of this approach, u...

Ignition of an ethylene fueled cavity in a supersonic flow was achieved through the application of two energy deposition techniques: a spark discharge and pulse detonator (PD). High-frequency shadowgraph and chemiluminescence imaging showed that the spark discharge ignition was passive with the ignition kernel and ensuing flame propagation following the cavity flowfield. The PD produced a high-...

The aim of this work is to investigate and characterize the photo-ignition process of dry multi-walled carbon nanotubes (MWCNTs) mixed with ferrocene (FeCp₂) powder, using an LED (light-emitting diode) as the light source, a combination that has never been used, to the best of our knowledge. The ignition process was improved by adding a lipophilic porphyrin (H₂Pp) in powder to the MWCNTs/FeCp₂ ...