an investigation on the thermal performance of the soil as geothermal heat energy storage medium has been conducted. the thermal characteristics of the soil storage and the heat transfer from a heat exchanger in the soil, surrounding and bottom surface will be discussed. this investigation forms a contribution to a project to realize such storage to be charged from a solar heating system. this ...

An experimental study has been conducted to evaluate the performance of a compact round-tube louver-fin condenser, each with frontal areas of 0.25 m in both dry and wet conditions. Deluge water cooling is achieved by incorporating a perforated bottom plate-type water distributor on top of the round tube heat exchanger. Water is used as a refrigerant, and enters the heat exchanger tubes at 35°C ...

In air-cooling applications with frost production, heat exchanger performance is often air-side limited, because the two-phase flow of the refrigerant provides excellent heat transfer coefficients, and because designers typically use a large air-side fin spacing for frost tolerance. The large fin spacing prolongs operation of the heat exchanger by mitigating the effect of the accumulating frost...

in this paper, overall heat transfer coefficient and friction factor of water based γ-al2o3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. for better dispersion of γ-al2o3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kw and frequency of 35 khz) were implemented. the stabi...

In present work, comparison of three different tube bundles for particular heat exchanger is proposed. Three types are smooth, micro finned and corrugated tubes. Heat exchanger will be designed with smooth tube bundle and simulated. Micro fin and corrugation over tube is applied separately for same heat exchanger in feasible size and simulated for performance. Besides, comparison is done with h...

Heat exchangers are one of the most important devices of mechanical systems in modernsociety. Most industrial processes involve the transfer of heat and more often they requirethe heat transfer process to be controlled. A heat exchanger is the heat exchanged betweentwo media, one being cold and the other being hot. There are different types of heatexchanger, but the type which is widely used in...

This two-part study explores the development and thermal performance of a coiled-tube heat exchanger for hydrogen fuel cell storage systems utilizing High-Pressure Metal Hydride (HPMH). The primary purpose of this heat exchanger is to tackle the large amounts of heat released from the exothermic hydriding reaction that occurs when the hydrogen is charged into the storage vessel and is absorbed ...

The reduction of SO2 and PM for marine engines was investigated using the electrostatic precipitator (ESP) with the heat exchanger. The experiments were carried out to reduce SO2 due to condensation of water in the exhausted gas. The experimental system consists of the diesel engine, the heat exchanger and the ESP. The exhausted gas at 180 o C of the temperature is cooled to 20 o C, and generat...